| Skip Navigation Links | |
| Exit Print View | |
|
Sun Blade Storage Module M2 Administration Guide |
About This Documentation (PDF and HTML)
SAS Device Access to the Chassis SAS-2 Domain
Host Access to Storage Module Resources Using the Sun Blade Zone Manager
How to Assign Storage to Hosts Using the CMM ILOM Web Interface
How to Assign Storage to Hosts Using the CMM ILOM CLI
Overview of Storage Module Management
Management Options Using the CMM ILOM
Management Options Using the Sun Storage 6Gb SAS REM RAID HBA (SGX-SAS6-R-REM-Z)
Management Options Using the Sun Storage 6Gb SAS REM HBA (SGX-SAS6-REM-Z)
Performing Maintenance and Hot Plug Actions
Preparing for Hot Plug Actions
Recovering Zoning Configurations
Upgrading Storage Module Firmware
Importing Existing Virtual Drives to a Replacement REM
Replacing a REM on a SPARC System
Replacing a REM on an x86 System
Displaying Sensor and Indicator Information Using the CMM ILOM Web Interface
Displaying Sensor and Indicator Information Using the CMM ILOM CLI
The storage module includes several sensors and indicators that report on hardware conditions. Many of the sensor readings can trigger events, such as illuminating system indictor LEDs, shutting down the module for temperature and over-voltage conditions, and powering off the storage module.
Note - For information about how to obtain sensor readings or to determine the state of system indicators in CMM ILOM, refer to the Oracle Integrated Lights Out Manager (ILOM) CMM Administration Guide for Sun Blade 6000 and 6048 Modular Systems found in the Sun Blade 6000 Modular System documentation (http://docs.sun.com/app/docs/prod/blade.6000mod~blade6000ilom#hic)
The following sections describe the sensors and indicators that the CMM ILOM monitors for the Sun Blade Storage Module M2. Device-specific examples (hard disks, sensors and indicators) are shown using the CMM ILOM CLI.
|