|
|
|
|---|
guid |
Port GUID on which the
Subnet Manager is running. |
0x0000000000000000 |
m_key |
M_Key value sent to all ports qualifying all Set(PortInfo). |
0x0000000000000000 |
m_key_lease_period |
Lease period used
for the M_Key in seconds. |
0 |
sm_key |
SM_Key value of the Subnet Manager used for authentication. |
0x0000000000000001 |
sa_key |
SM_Key
value used to qualify received Subnet Administrator queries as trusted. |
0x0000000000000001 |
subnet_prefix |
Subnet prefix. |
0xfe80000000000000 |
lmc |
LMC value used
on this subnet. |
0 |
lmc_esp0 |
lmc_esp0 determines whether LMC value is used for enhanced switch port
0. If TRUE, LMC value for subnet is used for ESP0. Otherwise, LMC value
for ESP0s is 0. |
FALSE |
packet_life_time |
Maximum time a packet can live in a switch. Actual
time is 4.096 usec * 2^packet_life_time. A value of 0x14 disables the mechanism. |
0x12 |
vl_stall_count |
Number
of sequential packets dropped that cause the port to enter the VLStalled state. Do
not set to 0. |
0x07 |
leaf_vl_stall_count |
Similar to vl_stall_count, this value is for switch ports driving
a CA or router port. Do not set to 0. |
0x07 |
head_of_queue_lifetime |
Maximum time a packet
can wait at the head of the transmission queue. Actual time is 4.096
usec * 2^head_of_queue_lifetime. A value of 0x14 disables the mechanism. |
0x12 |
leaf_head_of_queue_lifetime |
Maximum time a packet
can wait at the head of the queue on a switch port connected
to a CA or router port. Actual time is 4.096 usec * 2^leaf_head_of_queue_lifetime. |
0x10 |
max_op_vls |
Maximum
operational virtual lanes. |
5 |
force_link_speed |
Force PortInfo:LinkSpeedEnabled on switch ports. Values are:
Default is 15: set to
PortInfo:LinkSpeedSupported |
15 |
subnet_timeout |
Subnet timeout for all the ports. Actual timeout is 4.096 usec * 2^subnet_timeout.
|
18 |
local_phy_errors_threshold |
Threshold of local PHY errors for sending trap 129. |
0x08 |
overrun_errors_threshold |
Threshold of credit overrun errors
for sending trap 130. |
0x08 |
partition_config_file |
Partition configuration file. |
/etc/opensm/partitions.conf |
no_partition_enforcement |
Disable partition enforcement by switches. |
FALSE |
sweep_interval |
Number of seconds
between subnet sweeps (0 disables). |
10 |
reassign_lids |
If TRUE, reassign all LIDs. |
FALSE |
force_heavy_sweep |
If TRUE, force heavy sweeps. |
FALSE |
sweep_on_trap |
If TRUE,
heavy sweep on trap. Successive identical traps (>10) are suppressed. |
TRUE |
port_profile_switch_nodes |
If TRUE, count switches as
link subscriptions. |
FALSE |
routing_engine |
Routing engine: minhop, updn, file, ftree, lash, or dor. Multiple routing engines
are comma delimited. |
ftree |
sm_priority |
Subnet Manager priority determines the master. Range is 0 (lowest priority) to
13 (highest). |
0 |
ignore_other_sm |
If TRUE, ignore other Subnet Managers. |
FALSE |
sminfo_polling_timeout |
Timeout in msec between consecutive
polls of active master Subnet Manager. |
1000 |
polling_retry_number |
Number of failing polls of remote Subnet
Manager to declare it dead. |
3 |
honor_guid2lid_file |
If TRUE, honor the guid2lid file when coming out of
standby state. |
FALSE |
max_wire_smps |
Maximum number of SMPs sent in parallel. |
4 |
transaction_timeout |
Maximum time in msec
allowed for a transaction to complete. |
200 |
max_msg_fifo_timeout |
Maximum time in msec a message can stay in
the incoming message queue. If two or more messages exceed this time in
the queue, any Subnet Administrator request is returned with a BUSY status. |
10000 |
single_thread |
Use
a single thread for handling Subnet Administrator queries. |
FALSE |
daemon |
Daemon mode. |
FALSE |
sm_inactive |
Deactivate the Subnet Manager. |
FALSE |
babbling_port_policy |
Babbling Port
Policy. |
FALSE |
log_flags |
Log flags used. |
0x03 |
force_log_flush |
Force flush of the log file after each log message. |
FALSE |
log_file |
Log file
to be used. |
/var/log/opensm.log |
log_max_size |
Maximum size of the log file in MB. If overrun, log
is restarted. |
0 |
accum_log_file |
If TRUE, accumulates the log over multiple OpenSM sessions. |
TRUE |
dump_files_dir |
Directory for the OpenSM
dump files. |
/var/log/ |
no_clients_rereg |
If TRUE, disables client reregistration. |
FALSE |
disable_multicast |
If TRUE, multicast support and multicast routing is
disabled. |
FALSE |
exit_on_fatal |
If TRUE, opensm exits on fatal initialization issues. |
TRUE |
console |
Console is either off or
local. |
off |
console_port |
Telnet port for console (default 10000). |
10000 |
prefix_routes_file |
Prefix routes file name. |
/etc/opensm/prefix-routes.conf |
opensm Command, the opensmd daemon initiates an instance of the OpenSM Subnet Manager.
The daemon reads the /etc/opensm/opensm.conf configuration file upon startup, which it uses to
configure the Subnet Manager. The opensmd daemon is more user-friendly because it is not
necessary to provide elaborate command-line options and arguments. 
