Documentation, Support, and Training
Sun Storage F5100 Flash Array Overview
Obtaining the Chassis Serial Number
Choosing a Method for Diagnosing Faults
Diagnosing Faults With Sun StorageTek Common Array Manager Software
Diagnosing Faults With LEDs and Indicators
Preparing to Service the System
Place the System in Active-Standby Power Mode
Completely Power Off the System
Performing an Antistatic Discharge
Perform Static Discharge Procedures
Extend the Chassis to the Maintenance Position
Remove the Chassis From the Rack
Customer-Replaceable and Field-Replaceable Components
Replacing an Energy Storage Module
Replacing the Motherboard Assembly
Replacing a Power Distribution Board
Replacing the Connector Board Assembly
Replacing the Energy Storage Backplane
Returning the System to Service
Install the Chassis to Maintenance Position
Return the System to the Fully Installed Position
This section describes important safety information that you need to know prior to removing or installing parts in the Sun Storage F5100 Flash Array.
For your protection, observe the following safety precautions when setting up your equipment:
Follow all cautions and instructions marked on the equipment and described in the documentation shipped with your system.
Follow all cautions and instructions marked on the equipment and described in the product documentation.
Ensure that the voltage and frequency of your power source match the voltage and frequency inscribed on the equipment’s electrical rating label.
Wear an antistatic wrist strap and use an antistatic mat when handling components such as the motherboard or power distribution board. Following this practice equalizes the electrical potentials between you and the server.
Familiarize yourself with the following warning symbols used in the product documentation.
Caution - There is a risk of personal injury and equipment damage. To avoid personal injury and equipment damage, follow the instructions. |
Caution - Hot surface. Avoid contact. Surfaces are hot and might cause personal injury if touched. |
Caution - Hazardous voltages are present. To reduce the risk of electric shock and danger to personal health, follow the instructions. |