Documentation, Support, and Training
Sun Storage F5100 Flash Array Overview
Obtaining the Chassis Serial Number
Choosing a Method for Diagnosing Faults
Diagnosing Faults With LEDs and Indicators
Front Panel Indicators and Buttons
Energy Storage Module Indicators
Motherboard Assembly Troubleshooting
Preparing to Service the System
Performing an Antistatic Discharge
Customer-Replaceable and Field-Replaceable Components
Replacing an Energy Storage Module
Replacing the Motherboard Assembly
Replacing a Power Distribution Board
Replacing the Connector Board Assembly
Replacing the Energy Storage Backplane
Returning the System to Service
Install the Chassis to Maintenance Position
Return the System to the Fully Installed Position
The Sun StorageTek Common Array Manager (CAM) software is a web-based management software that provides both a browser interface and a command-line interface (CLI) for configuring and managing arrays on an external management host. The following types of events can be monitored using the fault management features of the software:
Component failure, insertion, and removal
Environmental threshold violations (for example, temperature, voltage, and fan speed)
Presence of firmware that is not at baseline revision
You can also use CAM Service Advisor as a reference for much of the information that is provided in this documentation.
You can direct the software to notify you of faults through email or Simple Network Management Protocol (SNMP) traps.
For information about using this software to identify and diagnose faults with the Sun Storage F5100 Flash Array, refer to the Sun StorageTek Common Array Manager User Guide for Open Storage (part no. 820-6663).