How to Verify the ILOM and BIOS Firmware Versions Using the Command-Line Interface Through the Management Ethernet Port

1. Connect an RJ-45 Ethernet cable to the NET MGT Ethernet port on the back panel.
2. Establish an SSH connection using the following command, and then enter the default password when you are prompted:

   # ssh —l root sp_ip_address

   changeme

   After you have successfully logged in, the SP default command prompt appears:

   ->

3. To view the ILOM version information, type:

   version

   This command returns input similar to the following:

   SP firmware 2.0.2.16
   SP firmware build number: 42063
   SP firmware date: Mon Feb  9 22:45:34 PST 2009
   SP filesystem version: 0.1.16

4. To view the BIOS version, type:

   show /SYS/MB/BIOS

   The command returns input similar to the following:

    /SYS/MB/BIOS
       Targets:
   
       Properties:
           type = BIOS
           fru_name = SYSTEM BIOS
           fru_description = SYSTEM BIOS
           fru_manufacturer = AMERICAN MEGATRENDS
           fru_version = 0ABMN052
           fru_part_number = AMIBIOS8
   
       Commands:
           cd
           show

   The fru_version field contains the BIOS version number.

5. Note the ILOM and BIOS versions on the Firmware Versions Worksheet.