Configuring the SLB Topology Example
SLB Configuration Guidelines and Prerequisites
Configuring the SLB-L2 Topology Example
Sample SLB-L2 Topology Example
SLB-L2 Configuration Guidelines and Prerequisites
Conditions for a Member Participating in Load Distribution
Set the Traffic Distribution Policy
Restore the Default Traffic Distribution Policy
View the Traffic Distribution Policy
Restore the Default Traffic Distribution Policy
Restore the Default Failover Method
Creating Example SLB Configurations
Creating a Basic SLB Configuration
Save the Current Configuration
Creating a Separate VLAN SLB Configuration
Separate VLAN SLB Configuration
Configuration With Separate VLANs Steps
Save the Current Configuration
Creating a Multiple SLB Group Configuration
Multiple-SLB-Group Configuration
Configuration With Multiple SLB Groups Steps
Set Up the Servers in SLB Group 1
Set Up the Servers in SLB Group 2
Save the Current Configuration
Restart the Server Following Failure
Creating SLB-L2 Configuration Examples
Bump-In-The-Wire Configuration
Creating a Single-Switch Configuration
Basic Single-Switch Configuration
Create a Single-Switch Configuration
Creating a Dual-Switch Configuration
Create a Dual-Switch Configuration
Shut down SLB-related switch ports on the switch.
SEFOS# configure terminal SEFOS(config)# interface range extreme-ethernet 0/11-12 SEFOS(config-if-range)# shutdown SEFOS(config-if-range)# exit
SEFOS(config)# interface range extreme-ethernet 0/15-21 SEFOS(config-if-range)# shutdown SEFOS(config-if-range)# exit
SEFOS(config)# set gvrp disable SEFOS(config)# set gmrp disable
SEFOS(config)# spanning-tree mst configuration SEFOS(config-mst)# name example3 SEFOS(config-mst)# revision 1 SEFOS(config-mst)# instance 1 vlan 3 SEFOS(config-mst)# instance 2 vlan 4 SEFOS(config-mst)# exit
Set up the server VLANs on up-links.
SEFOS(config)# vlan 3 SEFOS(config-vlan)# port extreme-ethernet 0/11 SEFOS(config-vlan)# exit SEFOS(config)# vlan 4 SEFOS(config-vlan)# port extreme-ethernet 0/12 SEFOS(config-vlan)# exit
Set up the VLAN switch port access to server networks.
SEFOS(config)# interface range extreme-ethernet 0/15-18 SEFOS(config-if-range)# switchport access vlan 3 SEFOS(config-if-range)# exit SEFOS(config)# interface range extreme-ethernet 0/19-21 SEFOS(config-if-range)# switchport access vlan 4 SEFOS(config-if-range)# exit
Set up the VLAN interface addresses of server VLANs.
SEFOS(config)# interface vlan 3 SEFOS(config-if)# shutdown SEFOS(config-if)# ip address 192.0.0.101 255.255.255.0 SEFOS(config-if)# no shutdown SEFOS(config-if)# exit SEFOS(config)# interface vlan 4 SEFOS(config-if)# shutdown SEFOS(config-if)# ip address 192.1.0.101 255.255.255.0 SEFOS(config-if)# no shutdown SEFOS(config-if)# end