Configuring the SLB Topology Example
SLB Configuration Guidelines and Prerequisites
Configuring the SLB-L2 Topology Example
Sample SLB-L2 Topology Example
SLB-L2 Configuration Guidelines and Prerequisites
Conditions for a Member Participating in Load Distribution
Set the Traffic Distribution Policy
Restore the Default Traffic Distribution Policy
View the Traffic Distribution Policy
Restore the Default Traffic Distribution Policy
Restore the Default Failover Method
Creating Example SLB Configurations
Creating a Basic SLB Configuration
Save the Current Configuration
Creating a Separate VLAN SLB Configuration
Separate VLAN SLB Configuration
Configuration With Separate VLANs Steps
Save the Current Configuration
Creating a Multiple SLB Group Configuration
Multiple-SLB-Group Configuration
Set Up the Servers in SLB Group 1
Set Up the Servers in SLB Group 2
Save the Current Configuration
Restart the Server Following Failure
Creating SLB-L2 Configuration Examples
Bump-In-The-Wire Configuration
Creating a Single-Switch Configuration
Basic Single-Switch Configuration
Create a Single-Switch Configuration
Creating a Dual-Switch Configuration
Create a Dual-Switch Configuration
This example shows the SLB configuration with multiple SLB groups. Servers are directly connected to the switch.
Use these steps to create this type of SLB configuration:
Set up switch A.
Set up switch B.
Repeat this step for each client in the client network.
Set up the client
Repeat this step for each server in the SLB group.
Set up the server.
Enable the switch ports.
Save the current configuration (if necessary).