About This Documentation (PDF and HTML)
Overview of the Sun Blade X6275 M2 Server Module
Server Module Front Panel and Indicators
Installing and Powering On the Server Module
About Your Server Module Shipment
Finding the Serial Number and Accessing Warranty Support Information
How to Install Your Server Module
How to Apply Full Power to a Server Module Node
How to Power Off a Server Module Node
Troubleshooting Server Power States
How to Display the ILOM IP Address Using the Web Interface
How to Display the ILOM IP Address Using the CLI
How to Log In to the ILOM Web Interface Using an Ethernet Connection
How to Log In to the ILOM CLI Using an Ethernet Connection
How to Log Into ILOM Using a Serial Connection
Configuring an ILOM IP Address
How to Configure a DHCP IP Address
How to Configure a Static IP Address
Accessing the Host Console Through ILOM
How to Connect to the Host Console Using the ILOM Web Interface
Use one of the following previously described methods:
Use the serial management port as described in How to Log Into ILOM Using a Serial Connection.
Use a client system to establish an SSH session over the network. See How to Log In to the ILOM CLI Using an Ethernet Connection.
-> start /HOST/console
The serial console output appears on the screen.
Note - If the serial console is in use, stop and restart it using the stop /HOST/console command followed by the start /HOST/console command.