Oracle Server Management Agents User's Guide Overview
Oracle Server Management Agents
Configuring Hardware Management Agent and Hardware SNMP Plugins
Hardware Management Agent Configuration File
How to Configure the Hardware Management Agent Logging Level
Configuring your Host Operating System's SNMP
(Solaris and Linux ) Configuring Net-SNMP/SMA
(Windows) How to Configure SNMP
Oracle Server Hardware SNMP Plugins Overview
Working With Management Agents
To configure the logging level, modify the hwagentd_log_levels parameter in the hwmgmtd.conf file. There are two ways to configure the logging level. The easiest way to configure the logging level is to set the hwagentd_log_levels parameter to one of the following levels.
|
Alternatively, you can set the logging level with a finer level of granularity by using the bit flags from the following table.
|
For example, when you want to set all logging levels between EMERG and NOTICE, the bit code values of all the required levels must be added and then converted to a decimal value. Referring to preceding table, the addition would be as follows:
0x0001 + 0x0002 + 0x0004 + 0x0008 + 0x0010 + 0x0020 = 0x003f
Converting this hexadecimal value to decimal equals 63, which is the desired log level. This is the decimal number that should be assigned to the hwagentd_log_levels parameter in the hwmgmtd.conf file.