| Skip Navigation Links | |
| Exit Print View | |
|
Sun Storage Archive Manager 5.3 Configuration and Administration Guide Sun QFS and Sun Storage Archive Manager 5.3 Information Library |
| Skip Navigation Links | |
| Exit Print View | |
|
|
Sun Storage Archive Manager 5.3 Configuration and Administration Guide Sun QFS and Sun Storage Archive Manager 5.3 Information Library |
Task Map: Configuring Storage Devices for Archiving
Adding Tape Devices for Archiving
Files that Contain Configuration Information
How to Add Tape Devices for Archiving (Command Line)
How to Add Tape Drive Interface Target IDs and LUNs for Archiving (Command Line)
How to Add Tape Devices for Archiving (SAM-QFS Manager)
Adding Libraries or Magneto-Optical Drives for Archiving
How to Configure Device Support in SCSI or FC Environments Using SAM-QFS Manager
How to Configure Device Support for a Direct-Attached Library
Recovering After a Direct-Attached Library Fails to Initialize
Verifying and Implementing Configurations
How to Verify That All Devices Are Configured and Implement the Changes
Handling Errors in the st.conf File
3. Performing Additional SAM-QFS Configuration
4. Creating Parameters Files for Network-Attached Automated Libraries
5. Checking the Drive Order in Libraries
7. Managing Automated Libraries and Manually Loaded Drives
8. Managing Vendor-Specific Libraries
11. Archive Directives (archiver.cmd)
12. Archive Set Directives (archiver.cmd)
Perform the tasks in this chapter only if you plan to enable archiving to tape or magneto-optical media.
|