| Skip Navigation Links | |
| Exit Print View | |
|
Sun Storage Archive Manager 5.3 Configuration and Administration Guide Sun QFS and Sun Storage Archive Manager 5.3 Information Library |
| Skip Navigation Links | |
| Exit Print View | |
|
|
Sun Storage Archive Manager 5.3 Configuration and Administration Guide Sun QFS and Sun Storage Archive Manager 5.3 Information Library |
2. Configuring Storage Devices for Archiving
Task Map: Configuring Storage Devices for Archiving
Adding Tape Devices for Archiving
Files that Contain Configuration Information
How to Add Tape Devices for Archiving (Command Line)
How to Add Tape Drive Interface Target IDs and LUNs for Archiving (Command Line)
How to Add Tape Devices for Archiving (SAM-QFS Manager)
Adding Libraries or Magneto-Optical Drives for Archiving
How to Configure Device Support in SCSI or FC Environments Using SAM-QFS Manager
How to Configure Device Support for a Direct-Attached Library
Recovering After a Direct-Attached Library Fails to Initialize
Verifying and Implementing Configurations
How to Verify That All Devices Are Configured and Implement the Changes
3. Performing Additional SAM-QFS Configuration
4. Creating Parameters Files for Network-Attached Automated Libraries
5. Checking the Drive Order in Libraries
7. Managing Automated Libraries and Manually Loaded Drives
8. Managing Vendor-Specific Libraries
11. Archive Directives (archiver.cmd)
12. Archive Set Directives (archiver.cmd)
Errors can occur if the st.conf file is not configured properly during SAM-QFS software installation.
The following messages in the sam-log file indicate that the appropriate changes have not been made to /kernel/drv/st.conf.
May 18 12:38:18 baggins genu-30[374]: Tape device 31 is default type. Update '/kernel/drv/st.conf'.
The following device log messages correspond to the sam-log message:
1999/05/18 12:34:27*0000 Initialized. tp 1999/05/18 12:34:28*1002 Device is QUANTUM , DLT7000 1999/05/18 12:34:28*1003 Serial CX901S4929, rev 2150 1999/05/18 12:34:28*1005 Known as Linear Tape(lt) 1999/05/18 12:34:32 0000 Attached to process 374 1999/05/18 12:38:18 1006 Slot 1 1999/05/18 12:38:18 3117 Error: Device is type default. Update /kernel/drv/st.conf
|