Task Map: Configuring Storage Devices for Archiving

Task	Description	More Information
Create list of devices	Take an inventory of your devices to configure.	See Table 2-1.
Add tape devices	Perform this task for each tape drive that you want to add to the SAM-QFS environment.	See Adding Tape Devices for Archiving Adding Tape Devices for Archiving.
Add tape drive interface target IDs and LUNs	Perform this task if your tape drives are attached through a SCSI or FC interface.	See How to Add Tape Drive Interface Target IDs and LUNs for Archiving (Command Line).
Add libraries or magneto-optical drives	Perform this task if you have any magneto-optical drives, SCSI-attached automated libraries, or FC-attached automated libraries that you want to include in your SAM-QFS environment.	See Adding Libraries or Magneto-Optical Drives for Archiving.
Verify configured devices	Verify that you have all of your devices properly configured.	See Verifying and Implementing Configurations.
Enable the storage device configuration	Reboot the system so that your changes take effect.
Create parameters files	Create parameter files for the network attached automated libraries.	See Chapter 4, Creating Parameters Files for Network-Attached Automated Libraries.

Skip Navigation Links
Exit Print View
	Sun Storage Archive Manager 5.3 Configuration and Administration Guide Sun QFS and Sun Storage Archive Manager 5.3 Information Library