Power Supply Fault Example (fmadm faulty Command)

This is an example of the fmadm faulty command reporting on the same power supply fault as shown in the show faulty example. See Power Supply Fault Example (show faulty Command). The two examples show the same UUID value.

The fmadm faulty command was run from within the Oracle ILOM faultmgmt shell.

-> start /SP/faultmgmt/shell
Are you sure you want to start /SP/faultmgmt/shell (y/n)? y
 
faultmgmtsp> fmadm faulty
------------------- ------------------------------------ -------------- -------
Time                UUID                                 msgid          Severity
------------------- ------------------------------------ -------------- -------
2010-08-11/14:54:23 59654226-50d3-cdc6-9f09-e591f39792ca SPT-8000-LC    Critical 
 
Fault class : fault.chassis.power.volt-fail 
 
Description : A Power Supply voltage level has exceeded acceptible limits.
 
Response    : The service required LED on the chassis and on the affected
              Power Supply might be illuminated.
 
Impact      : Server will be powered down when there are insufficient
              operational power supplies
 
Action      : The administrator should review the ILOM event log for
              additional information pertaining to this diagnosis.  Please
              refer to the Details section of the Knowledge Article for
              additional information.
 
faultmgmtsp> exit

Related Information

• No Faults Detected Example

• Power Supply Fault Example (show faulty Command)

• POST-Detected Fault Example (show faulty Command)

• PSH-Detected Fault Example (show faulty Command)

• Service-Related Oracle ILOM Commands