|Skip Navigation Links|
|Exit Print View|
|man pages section 4: File Formats Oracle Solaris 10 8/11 Information Library|
- network configuration database
The network configuration database, /etc/netconfig, is a system file used to store information about networks that are connected to the system. The netconfig database and the routines that access it (see getnetconfig(3NSL)) are part of the Network Selection component. The Network Selection component also includes getnetpath(3NSL) routines to provide application-specific network search paths. These routines access the netconfig database based on the environment variable NETPATH. See environ(5).
netconfig contains an entry for each network available on the system. Entries are separated by newlines. Fields are separated by whitespace and occur in the order in which they are described below. Whitespace can be embedded as ``\blank'' or ``\tab''. Backslashes may be embedded as ``\\''. Lines in /etc/netconfig that begin with a # (hash) in column 1 are treated as comments.
Each of the valid lines in the netconfig database correspond to an available transport. Each entry is of the form:
network ID semantics flag protocol-family \ protocol-name network-device translation-libraries
A string used to uniquely identify a network. network ID consists of non-null characters, and has a length of at least 1. No maximum length is specified. This namespace is locally significant and the local system administrator is the naming authority. All network IDs on a system must be unique.
The semantics field is a string identifying the ``semantics'' of the network, that is, the set of services it supports, by identifying the service interface it provides. The semantics field is mandatory. The following semantics are recognized.
Transport Provider Interface, connectionless
Transport Provider Interface, connection oriented
Transport Provider Interface, connection oriented, supports orderly release.
The flag field records certain two-valued (``true'' and ``false'') attributes of networks. flag is a string composed of a combination of characters, each of which indicates the value of the corresponding attribute. If the character is present, the attribute is ``true.'' If the character is absent, the attribute is ``false.'' ``-'' indicates that none of the attributes are present. Only one character is currently recognized:
Visible (``default'') network. Used when the environment variable NETPATH is unset.
The protocol family and protocol name fields are provided for protocol-specific applications. The protocol family field contains a string that identifies a protocol family. The protocol family identifier follows the same rules as those for network IDs; the string consists of non-null characters, it has a length of at least 1, and there is no maximum length specified. A ``-'' in the protocol family field indicates that no protocol family identifier applies (the network is experimental). The following are examples:
Loopback (local to host).
Internetwork: UDP, TCP, and the like.
Internetwork over IPv6: UDP, TCP, and the like.
ARPANET imp addresses
PUP protocols: for example, BSP
MIT CHAOS protocols
XEROX NS protocols
European Computer Manufacturers Association
CCITT protocols, X.25, and the like.
Direct data link interface
Network Interface Tap
IEEE 802.2; also ISO 8802
Umbrella for all families used by OSI (for example, protosw lookup)
CCITT X.25 in particular
AFI = 47, IDI = 4
U.S. Government OSI
The protocol name field contains a string that identifies a protocol. The protocol name identifier follows the same rules as those for network IDs; that is, the string consists of non-NULL characters, it has a length of at least 1, and there is no maximum length specified. A ``-'' indicates that none of the names listed apply. The following protocol names are recognized.
Transmission Control Protocol
User Datagram Protocol
Internet Control Message Protocol
The network device is the full pathname of the device used to connect to the transport provider. Typically, this device will be in the /dev directory. The network device must be specified.
The name-to-address translation libraries support a ``directory service'' (a name-to-address mapping service) for the network. A ``-'' in this field indicates the absence of any translation libraries. This has a special meaning for networks of the protocol family inet : its name-to-address mapping is provided by the name service switch based on the entries for hosts and services in nsswitch.conf(4). For networks of other families, a ``-'' indicates non-functional name-to-address mapping. Otherwise, this field consists of a comma-separated list of pathnames to dynamically linked libraries. The pathname of the library can be either absolute or relative. See dlopen(3C).
Each field corresponds to an element in the struct netconfig structure. struct netconfig and the identifiers described on this manual page are defined in <netconfig.h>. This structure includes the following members:
Network ID, including NULL terminator.
Full pathname of the network device.
Number of directory lookup libraries.
Names of the name-to-address translation libraries.
Reserved for future expansion.
The nc_semantics field takes the following values, corresponding to the semantics identified above:
The nc_flag field is a bitfield. The following bit, corresponding to the attribute identified above, is currently recognized. NC_NOFLAG indicates the absence of any attributes.
Example 1 A Sample netconfig File
Below is a sample netconfig file:
# # The "Network Configuration" File. # # Each entry is of the form: # # <networkid> <semantics> <flags> <protofamily> <protoname> <device> # <nametoaddrlibs> # # The "-" in <nametoaddrlibs> for inet family transports indicates # redirection to the name service switch policies for "hosts" and # "services". The "-" may be replaced by nametoaddr libraries that # comply with the SVr4 specs, in which case the name service switch # will not be used for netdir_getbyname, netdir_getbyaddr, # gethostbyname, gethostbyaddr, getservbyname, and getservbyport. # There are no nametoaddr_libs for the inet family in Solaris anymore. # udp6 tpi_clts v inet6 udp /dev/udp6 - tcp6 tpi_cots_ord v inet6 tcp /dev/tcp6 - udp tpi_clts v inet udp /dev/udp - tcp tpi_cots_ord v inet tcp /dev/tcp - rawip tpi_raw - inet - /dev/rawip - ticlts tpi_clts v loopback - /dev/ticlts straddr.so ticotsord tpi_cots_ord v loopback - /dev/ticotsord straddr.so ticots tpi_cots v loopback - /dev/ticots straddr.so