Go to main content
oracle home
Sun Storage 16 Gb Fibre Channel ExpressModule Universal Host Bus Adapter, QLogic Installation Guide For HBA Model 7101682
Exit Print View
Search Term
Search Scope:
This Document
Entire Library
» ...
Documentation Home
»
Sun Storage 16 Gb Fibre Channel ExpressModule ...
»
Sun Storage 16 Gb Fibre Channel ExpressModule ...
»
Universal HBA Installation and Removal
»
Removing the Hardware
»
To Remove the Universal HBA
Updated: July 2018
Sun Storage 16 Gb Fibre Channel ExpressModule Universal Host Bus Adapter, QLogic Installation Guide For HBA Model 7101682
Document Information
Using This Documentation
Product Documentation Library
Feedback
Chapter 1 Universal HBA Overview
Kit Contents
Universal HBA Features and Specifications
Operating System and Technology Requirements
Boot Support
System Interoperability
Host Platform Support
Switch Compatibility
Storage Support
Array Supported Storage
Tape Storage Support
Environmental Requirements
Chapter 2 Universal HBA Installation and Removal
Observing ESD and Handling Precautions
First Time Setup
Preparing for Installation
Installing and Removing SFP+ Optical Transceiver Modules
To Install an SFP+ Optical Transceiver Module
To Remove an SFP+ Optical Transceiver Module
Best Practices For HBA Installation
General Best Practices
Best Practices For Switches and Zoning
Best Practices For Booting From SAN (BFS) Configurations
Best Practices For Testing the Environment
Installing the Hardware
To Install the Universal HBA
Connecting the Cables
To Connect the Copper Cables
To Connect the Optical Cables
To Apply Power
Understanding LED Status Indicators
Removing the Hardware
To Remove the Hardware
To Prepare the Universal HBA for Removal Using the Attention Button
To Prepare the Universal HBA for Hot-Plug Removal Using the Oracle Solaris OS
To Remove the Universal HBA
Chapter 3 Operating Protocol Mode Configuration
About the Operating Protocol Mode
Determining and Changing the Current Operating Protocol Mode
Using the Fast!UTIL Utility to Determine and Change the Operating Protocol Mode
To Determine and Change the Operating Protocol Mode Using the Fast!UTIL Utility
To Configure PXE Booting
To Determine and Change the Operating Protocol Mode Using the UEFI Setup Menus
To Determine and Change the Operating Protocol Mode Using the FCode Utility
Determining and Changing the Operating Protocol Mode Using the QConvergeConsole CLI
To Determine and Change the Operating Protocol Mode Using the QConvergeConsole Noninteractive CLI
To Determine and Change the Operating Protocol Mode Using the QConvergeConsole Interactive CLI
To Determine and Change the Operating Protocol Mode Using the QConvergeConsole GUI
SR-IOV/FC-IOR Support
Chapter 4 Software Installation
Driver Software for the Oracle Solaris OS
Oracle Solaris Diagnostic Support
Installing Software for the Red Hat and SUSE Linux OSes
To Install Universal HBA Software for the Red Hat and SUSE Linux OSes
Installing Software for the VMware Technology
To Install the Universal HBA Software for the VMware Technology
Installing Software for the Windows OS
To Install the Universal HBA Software for the Windows OS
Diagnostic Support for the Oracle Solaris, Red Hat, SUSE Linux, and Windows OSes
To Install Diagnostic Support for Oracle Solaris, Red Hat, and SUSE Linux OSes
Installing the CLI for Updating the BIOS and FCode
Updating the Universal HBA Firmware
To Update the Universal HBA Firmware
Chapter 5 Known Issues
Link Aggregation Control Protocol (LACP) Cannot Be Used In Certain Conditions
Perform a One-Time Firmware Update For FC SR-IOV Support
vpd r/w failed Error Messages Are Displayed
Cannot Boot Net Over DHCP Through the Universal HBA
Glossary
Language:
English
To Remove the Universal HBA
Prepare for removal, as described in
To Prepare the Universal HBA for Removal Using the Attention Button
or
To Prepare the Universal HBA for Hot-Plug Removal Using the Oracle Solaris OS
.
Disconnect all cables.
With an ESD wrist strap attached to your wrist (refer to
Observing ESD and Handling Precautions
), press down on the ExpressModule latch to disengage the universal HBA.
Pull forward on the ejector lever to dislodge the universal HBA.
Remove the universal HBA.
Previous
Next