Document Information
Using This Documentation
Related Documentation
Documentation Feedback
Product Downloads
Download Product Software and Firmware
Oracle ILOM 3.1 Firmware Version Numbering Scheme
Support and Accessibility
Quick Start
Oracle ILOM 3.1 – Quick Start
Factory Default Settings
Mandatory Setup Tasks
Optional Setup Tasks
Daily Management Tasks
Routine Maintenance Tasks
Initial Setup FAQs
Configuration and Maintenance
Setting Up a Management Connection to Oracle ILOM and Logging In
Establishing a Management Connection to Oracle ILOM
Logging In to Oracle ILOM Server SP or CMM
Configuring Oracle ILOM for Maximum Security
Setting Up and Maintaining User Accounts
Managing User Credentials
Configuring Local User Accounts
Configuring Active Directory
Configuring LDAP/SSL
Configuring LDAP
Configuring RADIUS
Modifying Default Settings for Network Deployment and Administration
Network Deployment Principles and Considerations
Modifying Default Management Access Configuration Properties
Modifying Default Connectivity Configuration Properties
Example Setup of Dynamic DNS
Assigning System Identification Information
Setting Properties for SP or CMM Clock
Suggested Resolutions for Network Connectivity Issues
Using Remote KVMS Consoles for Host Server Redirection
First-Time Setup for Oracle ILOM Remote Console
Launching and Using the Oracle ILOM Remote Console
First Time Setup for Oracle ILOM Storage Redirection CLI
Launching and Using the Oracle ILOM Storage Redirection CLI
Starting and Stopping a Host Serial Redirection Session
Host Serial Console Log Properties
Configuring Host Server Management Actions
Controlling Host Power to Server or Blade System Chassis
Setting Host Diagnostic Tests to Run
Setting Next Boot Device on x86 Host Server
Setting Boot Behavior on SPARC Host Server
Overriding SPARC Host Boot Mode
Managing SPARC Host Domains
Setting SPARC Host KeySwitch State
Setting SPARC Host TPM State
Setting Up Alert Notifications and Syslog Server for Event Logging
Configuring Alert Notifications
Configuring Syslog for Event Logging
Setting System Management Power Source Policies
Power-On and Cooling-Down Policies Configurable From the Server SP
System Management Power Supply Policies Configurable From CMM
Setting Power Alert Notifications and Managing System Power Usage
Setting Power Consumption Alert Notifications
Setting CMM Power Grant and SP Power Limit Properties
Setting SP Advanced Power Capping Policy to Enforce Power Limit
Setting SP Power Management Settings for Power Policy (SPARC)
Setting the CMM Power Supply Redundancy Policy
Performing Oracle ILOM Maintenance and Configuration Management Tasks
Performing Firmware Updates
Reset Power to Service Processor or Chassis Monitoring Module
Backing Up, Restoring, or Resetting the Oracle ILOM Configuration
Maintaining x86 BIOS Configuration Parameters
BIOS Configuration Management
Performing BIOS Configuration Tasks From Oracle ILOM
SAS Zoning Chassis Blade Storage Resources
Zone Management for Chassis-Level SAS-2 Capable Resources
Manageable SAS-2 Zoning-Capable Devices
Sun Blade Zone Manager Properties
Important SAS Zoning Allocations Considerations
Enabling Zoning and Creating SAS-2 Zoning Assignments
Managing Existing SAS-2 Storage Resource Allocations
Resetting Sun Blade Zone Manager Allocations to Factory Defaults
Resetting the Zoning Password to Factory Default for Third-Party In-Band Management
User's Guide
Oracle ILOM Overview
About Oracle ILOM
Oracle ILOM Features and Functionality
Supported Management Interfaces
Supported Operating System Web Browsers
Integration With Other Management Tools
Getting Started With Oracle ILOM 3.1
Logging In to Oracle ILOM
Navigating the Redesigned 3.1 Web Interface
Navigating the Command-Line Interface (CLI) Namespace Targets
Collecting System Information, Monitoring Health Status, and Initiating Host Management
Collecting Information, Status, and Initiating Common Actions
Administering Open Problems
Administering Service Actions: Oracle Blade Chassis NEMs
Managing Oracle ILOM Log Entries
Performing Commonly Used Host Management Actions (Web)
Applying Host and System Management Actions
Administering Host Management Configuration Actions
Administering System Management Configuration Actions
Troubleshooting Oracle ILOM Managed Devices
Network Connection Issues: Oracle ILOM Interfaces
Tools for Observing and Debugging System Behavior
Enabling and Running Oracle ILOM Diagnostic Tools
Real-Time Power Monitoring Through Oracle ILOM Interfaces
Monitoring Power Consumption
Monitoring Power Allocations
Analyzing Power Usage Statistics
Comparing Power History Performance
Managing Oracle Hardware Faults Through the Oracle ILOM Fault Management Shell
Protecting Against Hardware Faults: Oracle ILOM Fault Manager
Oracle ILOM Fault Management Shell
Using fmadm to Administer Active Oracle Hardware Faults
Using fmdump to View Historical Fault Management Logs
Using fmstat to View the Fault Management Statistics Report
Using the Command-Line Interface
About the Command-Line Interface (CLI)
CLI Reference For Supported DMTF Syntax, Command Verbs, Options
CLI Reference For Executing Commands to Change Properties
CLI Reference For Mapping Management Tasks to CLI Targets
CLI Reference
Basic CLI Command Reference for Oracle ILOM 3.1
System Information and Management
Host and System Control
Oracle ILOM Initial Setup
System Monitoring and Status
System Inventory
Oracle ILOM Maintenance
Oracle ILOM Configuration Management
Oracle ILOM Help
SNMP, IPMI, CIM, WS-MAN Protocol Management
SNMP Overview
About Simple Network Management Protocol
SNMP Components
Oracle ILOM SNMP MIBs
SNMP Command-Line Syntax Examples
Configuring SNMP Settings in Oracle ILOM
Managing SNMP Read and Write Access, User Accounts, and SNMP Trap Alerts (CLI)
Managing SNMP Read and Write Access, User Accounts, and SNMP Trap Alerts (Web)
Downloading SNMP MIBs Using Oracle ILOM
Manage User Accounts Using SNMP
Before You Begin – User Accounts (SNMP)
Configuring Oracle ILOM User Accounts (SNMP)
Configuring Oracle ILOM for Active Directory (SNMP)
Manage DNS Name Server Settings (SNMP)
Configuring Oracle ILOM for LDAP (SNMP)
Configuring Oracle ILOM for LDAP/SSL (SNMP)
Configuring Oracle ILOM for RADIUS (SNMP)
Manage Component Information and Email Alerts (SNMP)
Before You Begin – Component Information (SNMP)
Viewing Component Information (SNMP)
Managing Clock Settings, Event Log, Syslog Receiver, and Alert Rules (SNMP)
Configuring SMTP Client for Email Alert Notifications (SNMP)
Configuring Email Alert Settings (SNMP)
Monitor and Manage System Power (SNMP)
Before You Begin – Power Management (SNMP)
Monitoring the Power Consumption Interfaces (SNMP)
Maintaining System Power Policy (SNMP)
Managing System Power Properties (SNMP)
Manage Oracle ILOM Firmware Updates (SNMP)
Update Oracle ILOM Firmware (SNMP)
Manage Oracle ILOM Backup and Restore Configurations (SNMP)
View and Configure Backup and Restore Properties (SNMP)
Manage SPARC Diagnostics, POST, and Boot Mode Operations (SNMP)
Before You Begin – Manage SPARC Hosts (SNMP)
Managing SPARC Diagnostic, POST, and Boot Mode Properties (SNMP)
Server Managment Using IPMI
Intelligent Platform Management Interface (IPMI)
Configuring the IPMI Service
Using IPMItool to Run ILOM CLI Commands
Performing System Management Tasks (IPMItool)
IPMItool Utility and Command Summary
Server Management Using WS-Management and CIM
WS-Management and CIM Overview
Configuring Support for WS-Management in Oracle ILOM
Supported DMTF SMASH Profiles, CIM Classes and CIM Indications
Oracle's Sun-Supported CIM Classes
Document Conventions for Oracle's Sun-Supported CIM Classes
Oracle_AssociatedIndicatorLED
Oracle_AssociatedSensor
Oracle_Chassis
Oracle_ComputerSystem
Oracle_ComputerSystemPackage
Oracle_Container
Oracle_ElementCapabilities
Oracle_ElementConformsToProfile
Oracle_EnabledLogicalElementCapabilities
Oracle_HWCompErrorOkIndication
Oracle_IndicatorLED
Oracle_InstCreation
Oracle_InstDeletion
Oracle_LogEntry
Oracle_LogManagesRecord
Oracle_Memory
Oracle_NumericSensor
Oracle_PhysicalAssetCapabilities
Oracle_PhysicalComponent
Oracle_PhysicalElementCapabilities
Oracle_PhysicalMemory
Oracle_PhysicalPackage
Oracle_Processor
Oracle_ProcessorChip
Oracle_Realizes
Oracle_RegisteredProfile
Oracle_RecordLog
Oracle_ReferencedProfile
Oracle_Sensor
Oracle_SpSystemComponent
Oracle_SystemDevice
Oracle_ThresholdIndication
Oracle_UseOfLog
SNMP Command Examples
snmpget Command
snmpwalk Command
snmpbulkwalk Command
snmptable Command
snmpset Command
snmptrapd Command
Feature Updates and Release Notes
Feature Enhancements as of Oracle ILOM 3.1
Feature Enhancements Summary
Updates to Oracle ILOM 3.1.x Firmware
Initial 3.1 Point Releases for Servers and Sun Blade 6000 CMM
Deprecation Notice for WS-Man as of Oracle ILOM 3.2.1
Oracle ILOM 3.1 Known Issues
Documentation Titles in Translated Documents
Glossary
Index
A
B
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Z
C
- chassis component property, allocated power, Power Allocation Plan Properties per Managed Device
- chassis view, Web Interface Navigation Options for Managed Devices
- /CH legacy targets, CLI command targets, CLI Legacy Service State Tasks and Applicable CLI Targets
- clearing
- faults, Clearing Faults for Repairs or Replacements
- faults for undetected components, Clear Faults for Undetected Replaced or Repaired Hardware Components
- log entries (CLI), View and Clear Log Entries (CLI)
- log entries (web), View and Clear Log Entries (Web)
- CLI
- backward compatiblity, Show or Hide Oracle ILOM 3.0 CLI Legacy Targets
- logging in, Log In to the Oracle ILOM CLI
- Sun Blade Zone Manager, Sun Blade Zone Manager CLI: Targets and Properties
- target namespace, Oracle ILOM 3.1 CLI Namespace Targets
- using to create Sun Blade Zone Manager chassis storage configuration, Manually Create SAS-2 Zoning Allocations (CLI)
- CLI commands
- executing commands requiring confirmation, Executing Commands That Require Confirmation
- executing individually, Executing Commands to Change Target Properties
- CLI command targets
- alert rules, Alert Notification Tasks and Applicable CLI Targets
- boot device selection, Host Server Management Tasks and Applicable CLI Targets
- chassis storage SAS zoning, Server Blade SAS Zoning Tasks and Applicable CLI Target
- configuring Oracle ILOM access, Network Deployment Tasks and Applicable CLI Targets
- default Oracle ILOM 3.1 targets, Oracle ILOM 3.1 CLI Namespace Targets
- domain boot device, Host Server Management Tasks and Applicable CLI Targets
- fault management shell, Fault Management Shell Session Task and Applicable CLI Target
- http/https access, Network Deployment Tasks and Applicable CLI Targets
- KVMS configuration, Remote KVMS Service State Tasks and Applicable CLI Target
- legacy targets
- Show or Hide Oracle ILOM 3.0 CLI Legacy Targets
- CLI Legacy Service State Tasks and Applicable CLI Targets
- listing target properties and commands, Navigating to Targets and Listing Their Properties and Supported Commands
- managing logs, Event and Audit Log Tasks and Applicable CLI Targets
- mapping tasks to targets, CLI Reference For Mapping Management Tasks to CLI Targets
- navigating the target namespace, Navigating the Command-Line Interface (CLI) Namespace Targets
- NEM service actions, NEM Service Action Tasks and Applicable CLI Target
- network port configuration, Management Connection Tasks and Applicable CLI Targets
- physical presence setting, Firmware Back Up and Restore Tasks and Applicable CLI Targets
- power consumption alert rules, Alert Notification Tasks and Applicable CLI Targets
- power on/off, Host Server Management Tasks and Applicable CLI Targets
- remote serial console configuration, Host Serial Console Session Tasks and Applicable CLI Target
- restart policy setting, Host Server Management Tasks and Applicable CLI Targets
- save, restore, reset BIOS configurations, x86 BIOS Back Up and Restore Tasks and Applicable CLI Targets
- save, restore, reset ILOM configurations, Firmware Back Up and Restore Tasks and Applicable CLI Targets
- serial port configuration, Management Connection Tasks and Applicable CLI Targets
- service processor reset, Host Server Management Tasks and Applicable CLI Targets
- showing targets and properties, Navigating to Targets and Listing Their Properties and Supported Commands
- single sign on, Network Deployment Tasks and Applicable CLI Targets
- SMTP server configuration, Alert Notification Tasks and Applicable CLI Targets
- SPARC diagnostics configuration, Host Diagnostic Tasks and Applicable CLI Targets
- SSH access, Network Deployment Tasks and Applicable CLI Targets
- Syslog configuration, Event and Audit Log Tasks and Applicable CLI Targets
- system policy configuration
- System Power-On Policy Tasks and Applicable CLI Targets
- System Power Usage Policy Tasks and CLI Targets
- system reset, Host Server Management Tasks and Applicable CLI Targets
- target namespace overview, Oracle ILOM 3.1 CLI Namespace Targets
- updating firmware, Firmware Update Tasks and Applicable CLI Targets
- USB internal port configuration, Management Connection Tasks and Applicable CLI Targets
- user accounts, User Management Tasks and Applicable CLI Targets
- user authentication using a remote server, User Management Tasks and Applicable CLI Targets
- viewing active session details, Event and Audit Log Tasks and Applicable CLI Targets
- viewing BIOS version, Firmware Update Tasks and Applicable CLI Targets
- viewing firmware version, Firmware Update Tasks and Applicable CLI Targets
- viewing sessions, Network Deployment Tasks and Applicable CLI Targets
- viewing /SYS, /STORAGE, /CH, CLI Legacy Service State Tasks and Applicable CLI Targets
- viewing system and component status, System Health Status Tasks and Applicable CLI Targets
- x86 diagnostics configuration, Host Diagnostic Tasks and Applicable CLI Targets
- zoning password, Server Blade SAS Zoning Tasks and Applicable CLI Target
- CLI target types
- /CH, Oracle ILOM 3.1 CLI Namespace Targets
- /CMM, Oracle ILOM 3.1 CLI Namespace Targets
- /HOST, Oracle ILOM 3.1 CLI Namespace Targets
- /Servers, Oracle ILOM 3.1 CLI Namespace Targets
- /SP, Oracle ILOM 3.1 CLI Namespace Targets
- /SYS
- Oracle ILOM 3.1 CLI Namespace Targets
- Oracle ILOM 3.1 CLI Namespace Targets
- Oracle ILOM 3.1 CLI Namespace Targets
- /System, Oracle ILOM 3.1 CLI Namespace Targets
- clock settings
- configuring network time protocol (NTP), View and Set Clock Settings
- setting, View and Set Clock Settings
- CMM
- blade server support, CMM Web Interface: Blade Server Views
- power allocation considerations, Power Allocated Components and Monitoring Considerations
- collecting
- information and status, Collecting Information, Status, and Initiating Common Actions
- system information, Collecting System Information, Monitoring Health Status, and Initiating Host Management
- command-line interface
- capabilities, Supported Management Interfaces
- cd command, Basic CLI Commands and Options
- create command, Basic CLI Commands and Options
- delete command, Basic CLI Commands and Options
- dump command, Basic CLI Commands and Options
- executing single or combined commands, CLI Reference For Executing Commands to Change Properties
- exit command, Basic CLI Commands and Options
- help command, Basic CLI Commands and Options
- load command, Basic CLI Commands and Options
- logging in, Log In to the Oracle ILOM CLI
- navigating, Navigating the Command-Line Interface (CLI) Namespace Targets
- new, Oracle ILOM Features and Functionality
- overview, About the Command-Line Interface (CLI)
- reset command, Basic CLI Commands and Options
- set command, Basic CLI Commands and Options
- show command, Basic CLI Commands and Options
- start command, Basic CLI Commands and Options
- stop command, Basic CLI Commands and Options
- supported commands and options, CLI Reference For Supported DMTF Syntax, Command Verbs, Options
- system management using the CLI, CLI Reference For Mapping Management Tasks to CLI Targets
- target tree, Glossary
- using, Using the Command-Line Interface
- using the show and help commands, Navigating to Targets and Listing Their Properties and Supported Commands
- version command, Basic CLI Commands and Options
- component information, view, View Component Information
- component power allocation
- CMM considerations, Power Allocated Components and Monitoring Considerations
- server SP considerations, Power Allocated Components and Monitoring Considerations
- component status, CLI command targets, System Health Status Tasks and Applicable CLI Targets
- considerations
- CMM power allocated components, Power Allocated Components and Monitoring Considerations
- power allocations monitoring, Power Allocated Components and Monitoring Considerations
- server SP power allocated components, Power Allocated Components and Monitoring Considerations
- console, redirecting host serial, CLI command targets, Host Serial Console Session Tasks and Applicable CLI Target
- CRU, Fault Management Terminology