Configure SNMP Protocol Settings on Embedded LOM SP Version 2.91

1. Launch the Embedded LOM service processor web GUI (Server Management) on the service processor to be configured and managed.
2. Log in to the Server Management application as root.

   Figure 4-4  Embedded LOM Server Management

   
   
3. Click Control > Platform Event Filter.

   The Platform Event Filter dialog appears.

   Figure 4-5  Platform Event Filter

   
   
4. Verify or set the following parameters:

   Parameter Value PEF Global Control Enable PEF is selected. IP Address IP address is specified for the Netcool/OMNIbus management server MAC Address MAC address is specified for the Netcool/OMNIbus management server

5. Scroll down to the next section on the Platform Event Filter dialog, and set the options appropriate for your environment.

   ---

   Note -  Ensure that the Enable Send Alert Action option is selected on the Platform Event Filter dialog.

   ---

6. To apply the settings, click Submit.
7. In the menu pane, click SNMP > SNMP Settings.
8. Verify or set the following parameters:

   Parameter Value Port 161 (the default value) v1 Protocol v1 Protocol, if needed, is selected. v2 Protocol v2 Protocol, if needed, is selected. v3 Protocol v3. Protocol, if supported on system and needed, is selected.

9. To apply the changes, click Submit.

   Your Embedded LOM service processor is now configured to send IPMI PETs to all trap destinations configured.