Remove the Front Support and Air Duct

1. Using a No. 2 Phillips screwdriver, remove the two M6x14 screws securing the front support.
   
2. Remove the front support and set it aside.

   ---

   Note - If the switch is installed with the data cables on the cold aisle, slide the front support off onto the data cables.

   ---

3. Slide the air duct off of the center rail and center slide, and set it aside.
   

   ---

   Note - If the switch is installed with the data cables on the cold aisle, slide the air duct off onto the data cables.

   ---

4. Consider your next step.

   • If you are servicing power supplies, return to the procedure, Power Off a Power Supply.

   • If you are servicing the fan module, return to the procedure, Remove the Fan Module.

Related Information

• Remove the CMA

• Servicing Power Supplies

• Servicing the Fan Module