Powering the Server On and Off
Your server has three power states: power off, standby power, and full power.
|
|
|
|
Power off
|
The server is completely powered off when the AC power cords are
disconnected.
|
The server is disconnected from all power sources.
|
Disconnect power cords to completely remove power.
Caution -
Equipment damage. Do not disconnect power cords when system is
in full power mode.
|
|
Standby power
|
When the server is in standby power mode, Oracle ILOM is powered
on but the host is powered off.
|
The power OK indicator blinks.
The service processor OK indicator is steady on.
|
If the server is completely powered off, plug in the power cords
to apply standby power.
If the server is in full power mode, use Oracle ILOM or the
recessed power button to remove host power.
You can power the host off gracefully, or immediately.
Caution -
Data loss: To prevent data loss, prepare the operating system
for shutdown before performing an immediate power off.
|
|
Full power
|
When you power on the host, the server enters full power
mode.
|
In full power mode, the power OK indicator is steady on.
|
Use Oracle ILOM or the recessed power button to apply host
power.
|
|
See Also: