Set Up the Servers in SLB Group 2

Complete the following task for each server in SLB group 2.

1. Set up the physical interface.

   server1% ifconfig ixgbe0 plumb
   server1% ifconfig ixgbe0 192.1.0.1 netmask 255.255.255.0 up
   

2. Set up the loopback interface.

   server1% ifconfig lo0:1 plumb
   server1% ifconfig lo0:1 11.11.11.1 netmask 255.255.255.0 up
    
   server1% ifconfig -a
    
   lo0:1: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
           inet 11.11.11.1 netmask ffffff00
   ixgbe0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
           inet 192.1.0.1 netmask ffffff00 broadcast 192.1.0.255
           ether 0:1b:21:9f:e9:e0
   

3. Add a route to reach the client network.

   server1% route add 20.0.0.0/24 192.1.0.100