Ping Between Hosts

1. Configure static routes on all switches such that all networks are reachable from any switch.

   ToR72p-1 SEFOS# configure terminal
   ToR72p-1 SEFOS(config)# ip route 192.168.100.0 255.255.255.0 192.168.20.20
   ToR72p-1 SEFOS(config)# ip route 192.168.100.0 255.255.255.0 192.168.30.20
   ToR72p-1 SEFOS(config)# ipv6 route 1000:: 112 2000::20
   ToR72p-1 SEFOS(config)# ipv6 route 1000:: 112 3000::20
   ToR72p-1 SEFOS(config)# end
    
   ES1-24p-1 SEFOS# configure terminal
   ES1-24p-1 SEFOS(config)# ip route 192.168.40.0 255.255.255.0 192.168.20.10
   ES1-24p-1 SEFOS(config)# ipv6 route 4000:: 112 2000::10
   ES1-24p-1 SEFOS(config)# end
    
   ES1-24p-2 SEFOS# configure terminal
   ES1-24p-2 SEFOS(config)# ip route 192.168.40.0 255.255.255.0 192.168.30.10
   ES1-24p-2 SEFOS(config)# ipv6 route 4000:: 112 3000::10
   ES1-24p-2 SEFOS(config)# end
   

2. Configure virtual IPv4 and IPv6 address as default gateway to ping each other on Host-1 and Host-2. The following pings to IPv4 and IPv6 addresses should be successful.

   Host-1# ping 192.168.100.50
   Host-1# ping 1000::50
    
   Host-2# ping 192.168.40.20
   Host-2# ping 4000::20