Enable an IB Port

This procedure is for the CLI.

1. Determine which IB port you want to enable.
2. Enable the IB port.

   For example:

   [OFOS] set infiniband-port embedded/1 up

3. Verify that the IB port is enabled.

   [OFOS] show infiniband-port
   name            state              mode_state            guid
   -------------------------------------------------------------
   embedded/1      up/down            switching             0
   embedded/2      up/down            switching             0
   embedded/3      up/down            switching             0
   embedded/4      up/down            switching             0
   embedded/5      up/down            switching             0
   embedded/6      up/down            switching             0
   embedded/7      up/down            switching             0
   embedded/8      up/down            switching             0
   embedded/9      up/down            switching             0
   embedded/10     up/down            switching             0
   embedded/11     up/down            switching             0
   embedded/12     up/down            switching             0
   embedded/13     up/down            switching             0
   embedded/14     up/down            switching             0
   embedded/15     up/down            switching             0
   embedded/16     up/down            switching             0
   embedded/17     up/down            switching             0
   embedded/18     up/down            switching             0
   embedded/19     up/down            switching             0
   embedded/20     up/down            switching             0
   embedded/21     up/down            switching             0
   embedded/22     up/down            switching             0
   embedded/23     up/down            switching             0
   embedded/24     up/down            switching             0
   embedded/25     up/down            switching             0
   embedded/26     up/down            switching             0
   embedded/27     up/down            switching             0
   embedded/28     up/down            switching             0
   embedded/29     up/down            switching             0
   embedded/30     up/down            switching             0
   30 records displayed

4. (Optional) If you plan to use SM groups, create and configure them now.

   See Manage SM Group Information.

Related Information

• Understanding SM Groups