Configure an Additional Port

If your deployment requires additional ports, you can configure up to two more ports. These ports can be IB ports or 40-GbE Ethernet ports. This procedure is for the CLI.

1. Configure an additional port, specifying an IB port, or a 10-Gb or 40-Gb Ethernet port.

   ---

   Note -  The leaf switch does not support the 10-Gb Ethernet port.

   ---

   [OFOS] set multiconfig-port slot/port -port-type=gwEthernet40GbPort

2. Verify that the port is working.

   [OFOS] show multiconfig-port
   name          port-type
   2/1           ibPort
   embedded/2    gwEthernet40GbPort

Related Information

• Using HCA Ports