Standard MT and PrizmMT MPO Cables
The most common connector for EDR is the 4x PrizmMT (PMT) MPO cable. Unlike the
standard MT ferrules found in traditional MPO cables, which are black in color and
function by way of physical contact between fiber tips, the new PrizmMT ferrules in
these new PrizmMT MPO cables use clear plastic molded lenses to transmit laser light
between fibers across small air gaps.
 | Caution -
Connecting a PrizmMT MPO cable to a standard MT MPO cable or port, such as on a
QSFP transceiver, will damage the PrizmMT ferrule and render the cable
unusable.
|
This table identifies PrizmMT MPO cable end types by the features of ferrule type,
shell color, alignment method, and describes what that cable end type connects with.
|
|
|
|
|
4x PrizmMT MPO optical cable
|
PrizmMT (clear with lenses)
|
Magenta
|
Post and hole
|
EDR 4x Ports (for example, Oracle Dual Port EDR InfiniBand Adapter
ports)
|
12x PrizmMT MPO optical cable
|
PrizmMT (clear with lenses)
|
Black
|
Post and hole
|
EDR 12x Ports (for example, Oracle EDR switch 12x ports)
|
|
Note -
Some supported cables have a PrizmMT MPO connector on one end, and a Standard MT
connector on the other. Pay close attention when connecting this cable, to identify
which connector is which, and not confuse the two.
Visually comparing the design of the three cables, note the differences between the
Standard MT MPO cable on the left, with the PrizmMT MPO cables in the middle and on the
right.
|
|
1
|
Aqua colored shell (Standard MT MPO)
|
2
|
Standard ferrule (Standard MT MPO)
|
3
|
Alignment pin holes (Standard MT MPO)
|
4
|
Contact type optical fibers (Standard MT MPO)
|
5, 10
|
Magenta and black colored shell (PrizmMT MPO)
|
6, 11
|
Prizm ferrule (PrizmMT MPO)
|
7, 12
|
Alignment post (PrizmMT MPO)
|
8, 13
|
Focused optical fiber array (PrizmMT MPO)
|
9, 14
|
Alignment hole (PrizmMT MPO)
|
|