The program description deals with the following:
The data for connection of a payment terminal, type Actosoft, can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can also be displayed for information.
Note:
For the use of this device an interface from type "IP address" must
be assigned.
The following description deals with all available options for update of this basic data.
As with nearly all programs the following also applies here:
Field with firmly defined selection options
Select one of the offered debug levels by clicking onto the field and with a second click choosing the option required.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for
the debug level if a protocol is required on the communication with the payment
terminal for error analysis. The data appears in file "errlog" in
directory work of the appropriate system unit.
Entry range permitted: numeric 0 - 9
Default = 1
Enter the number of the terminal in this field. The value entered here must match the value entered in the appropriate payment type, i.e. the payment terminal whose number is entered in program Payment type will be selected.
Entry range permitted: numeric 0 - 99999
Default = 4567
Entry range permitted: numeric 0 - 99999
Default = 9010
Entry range permitted: numeric 0 - 99999999
Enter the number of the ECR which is connected to the EFT device
Entry range permitted: numeric 0 - 99999
Enter the number of the branch.
Entry range permitted: numeric 0 - 999
Default = 9010
Select one of the offered types of protocol by clicking onto the field and with a second click choosing the option required.
The system offers the following protocols:
Entry range permitted: numeric 0 -1
Default = 1
Select one of the offered types of currencies by clicking onto the field and with a second click choosing the option required.
The system offers the following currencies:
Entry range permitted: alphanumeric, max. 32 pos.
Default = cardname
Switch activated: The device
works in test mode.
Switch deactivated: This device works in real mode.