The program description deals with the following:
The data for connection of a payment terminal, type Bankomat can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can also be displayed for information.
The interface and link to a processing unit have to be defined and the device-specific operating mode of the EFT terminal set.
Note:
This payment terminal for payments with
magnetic cards is only used in Austria. Other parameter settings are
required to operate this device, e.g. the appropriate Payment type with link of the valid Credit card, etc.
Click
on the graphic for further help with setting up an EFT terminal type Bankomat.
The following description deals with all available options for update of this basic data.
As with nearly all other programs the following also applies here:
Field with firmly defined selection options
Select one of the baud rates offered by clicking onto this field and with a second click confirming the selection.
The system offers the following baud rates:
Field with firmly defined selection options
Select one of the offered debug levels by clicking onto this field and confirming the selection with a second click.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for
the debug level if a protocol of the communication with the payment terminal is
required for error analysis. The details appear in file "errlog" in
directory work of the appropriate system unit.
Field with firmly defined selection options
Select one of the offered levels by clicking onto this field and with a second click confirming the selection.
The system offers the following settings:
Field with firmly defined selection options
Select one of the modes offered by clicking onto this field and with a second click confirming the selection.
The system offers the following settings:
Default = 5
Default = 50
Default = 60
Default = 5
Default = 1
Default = 1
Default = 6
Default = 6