The program description deals with the following:
The data for connection of a modem can be updated, i.e. programmed changed or cleared, with this program. Data which already exists can also be displayed for information.
The interface and link to a processing unit should be defined and the device-specific operating mode of the modem set.
This device is only used for data communications via the PP-ADS protocol.
The following description deals with all available options for update of this basic data.
As with nearly all other programs the following also applies here:
Field with firmly defined selection options
Select one of the offered baud rates by clicking onto this field and with a second click confirming the selection.
The system offers the following baud rates:
Please note that the permitted baud rate must match up to the setting of the PP-ADS protocol.
Field with firmly defined selection options
Select one of the offered debug levels by clicking onto this field and with a second click confirming the selection.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for
the debug level if a protocol is required for error analysis. The details are
shown in file "errlog" in directory work of the appropriate system unit.
Field with firmly defined selection options
Select one of the offered options by clicking onto this field and with a second click confirming the selection.
The system offers the following options:
Field with firmly defined selection options
Select one of the offered options by clicking onto this field and with a second click confirming the selection.
The system offers the following options:
Field with firmly defined selection options
Select one of the offered options by clicking onto this field and with a second click confirming the selection.
The system offers the following options:
Default = 30 millisecs.
Default = 600 millisecs.
This entry is dependent on the type of modem connected. Please refer to the hardware manual provided by the modem manufacturer.
This entry is dependent on the type of modem connected. Please refer to the hardware manual provided by the modem manufacturer.
This entry is dependent on the type of modem connected. Please refer to the hardware manual provided by the modem manufacturer.
This entry is dependent on the type of modem connected. Please refer to the hardware manual provided by the modem manufacturer.
Default = 1