The program description deals with the following:
The data of a device type Pr60-70 fiscal printer can be updated, i.e. programmed, changed or cleared, with this program. Data which already exists can also be displayed for information.
The specific printer parameters should be set and the interface and link to a processing unit defined.
Note:
Other settings are necessary in the MICROS Retail OSCAR POS
program to operate this fiscal printer. Please refer to the documentation FISCALIZATION.
The following description deals with all available options for update of this basic data.
As with nearly all other programs the following also applies here:
Entry range permitted: alphanumeric max. 18 pos.
Enter the factory no. of the fiscal printer in this field.
Entry range permitted: alphanumeric max. 5 pos.
Enter the fiscal ID no. in this field.
Entry range permitted: alphanumeric max. 12 pos.
Enter the fiscal no. in this field.
Entry range permitted: alphanumeric max. 20 pos.
Entry range permitted: alphanumeric max. 20 pos.
Field with firmly defined selection options
Select one of the offered debug levels by clicking onto this field and with a second click confirming the selection.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for
the debug level if a protocol of communications is required for error analysis.
Entry range permitted: numeric 1 - 9 (default = 0)
Enter the number of decimal places.
Entry range permitted: numeric 1 - 40 (default 40)
Enter the value for the line length if it is to differ from the default (= 40).
Field with firmly defined selection options
Select one of the modes offered for use of the customer display by clicking onto this field and with a second click confirming the selection.
The system offers the following settings:
Field with firmly defined selection options
Select one of the modes offered for use of the operator display by clicking onto this field and with a second click confirming the selection.
The system offers the following settings:
Default = 1
Entry range permitted: numeric 0 - 9
Enter the number of drawers connected.
Entry range permitted: numeric 0 - 9
Enter a value in this field if a drawer is connected to this printer and if this is to open as per the definition in Operator and Payment type parameters.
Field with firmly defined selection options
Select one of the offered baud rates by clicking on this field and with a second click confirming the selection.
The system offers the following baud rates:
Field with firmly defined selection options
Select one of the offered modes for the parity bit by clicking on this field and with a second click confirming the selection.
The system offers the following:
Default = 5000 (in milliseconds)
Default = 55000 (in milliseconds)
Default = 1000 (in milliseconds)
Poll timeout with open drawer.
Default = 200 (in milliseconds)
Poll timeout with closed drawer.
Switch active: An operator
display is connected.
Switch deactivated: No operator display connected
Switch active:
Switch deactivated:
Switch active:
Switch deactivated:
Switch active:
Switch deactivated:
Switch active:
Switch deactivated:
Switch active:
Switch deactivated: