The program description deals with the following:
The data for the RVM communication can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can also be displayed for information.
Click on graphic for further help with programming RVM (Reverse Vending Machine).
This device generally derived from the device TCP communikat. (P). The significant difference is the new attribute "Reset command" where a value can be set to be sent before the connection is done to the IP Address set in Device interfaces.
Note:
Prerequisite for the use of this device is, that the TCP Address is
entered in the device interface (format host:port) an the type
IP-Address or Shared IP-Address is used as device interface.
The default value fort he reset command is "reset" and will be use for Tomra devices. For this device the attribute portnumber must be set to 4242 and the attribute device name in device interface must be set to "host:4245" whereas host the content of the attribute Hostname is or at least refers to the same host. For example, the Tomra device with the IP-Address of 10.20.30.40 entered in etc/hosts as Tomradev, has in attribute "Hostname" the value "Tomradev", in attribute "Portnumber" 4242 and in device name of the device interface the value10.20.30.40:4245.
The following description deals with all available options for update of this basic data.
As with nearly all other programs the following also applies here:
Field with firmly defined selection options
Select one of the offered debug levels by clicking on this field and with a second click confirming the selection.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for
the debug level if a communication protocol is required for error analysis. The
details are shown in file "errlog" in directory work
of the appropriate system unit.
Entry range permitted: numeric 1 – 9
Entry range permitted: alphanumeric max. 80 pos.
Enter the name of the server in this field.
Example Tomra:
For example, the Tomra device with the IP-Address of 10.20.30.40 entered in etc/hosts
as Tomradev, has in attribute "Hostname" the value
"Tomradev", in attribute "Portnummer" 4242 and in device
name of the device interface the value10.20.30.40:4245.
Entry range permitted: numeric 0 -65535
Example Tomra:
For this device the attribute port number must be set to 4242 and the attribute device name in device interface must be set to "host:4245" whereas host the content of the attribute Hostname is or at least refers to the same host. For example, the Tomra device with the IP-Address of 10.20.30.40 entered in etc/hosts as Tomradev, has in attribute "Hostname" the value "Tomradev", in attribute "Portnumber" 4242 and in device name of the device interface the value10.20.30.40:4245.
Entry range permitted: numeric 1 - 32000
Default = 200
Entry range permitted: numeric 1
Default = 5000 milliseconds (Tomra)
Entry range permitted: numeric 1
Default = -1
Entry range permitted: numeric 1
Default = 0
Entry range permitted: alphanumeric max. 20 pos.
Default = reset
The command string will be send before the connection is done to the IP Address set in Device interfaces.
Example Tomra:
The default command of the reset command is "reset" which corresponds
to the demands of Tomra devices .
Entry range permitted: alphanumeric max. 20 pos.
Default = <?xml
Entry range permitted: alphanumeric max. 20 pos.
Default = </rvm_interface>
Switch active:
Switch deactivated:
Default = deactivated