本示例说明如何更改 fc-port 选项。在重置 I/O 卡之前，新设置不会生效。要采用新设置，必须使用 set iocard 命令重置卡。
show ioport name type state descr v-resources -------------------------------------------------------------- embedded/1 sanFc16GbPort up/up 0 embedded/2 sanFc16GbPort up/up 0 embedded/3 sanFc16GbPort up/up 0 embedded/4 sanFc16GbPort up/up 0 embedded/5 sanFc16GbPort up/up 0 embedded/6 sanFc16GbPort up/up 0 4/1 sanFc16GbPort up/up 0 4/2 sanFc16GbPort up/up 4 8 records displayed set fc-port 4/2 -fc-link-down-timeout=10 set iocard 4 reset Resetting IO cards will adversely affect any virtual IO resource connected to them and thus cut IO to the physical servers. Are you sure you want to reset the IO card in slot 4 (y/n)? y show ioport 4/2 -detail ---------------------------------------------------- name 4/2 type sanFc16GbPort state up/up descr wwnn 50:01:39:71:00:00:B0:1F wwpn 50:01:39:70:00:00:B0:1F rate auto/8Gbps frame-size 2048/2048 exec-throttle 65535 int-delay 1000 fc-link-down-timeout 10 login-retry 8 login-timeout 4 fc-target-port-down-timeout 30 topo F loop-delay 5 tape-support true sfp-type 8G vhbas_2Mb_mtu_size 0 vhbas 4 guid 10e09a864c0005 ----------------------------------------------------- 1 record displayed