Sun Network QDR InfiniBand Gateway Switch Product Notes for Firmware Version 2.2

Exit Print View

» ...Documentation Home » Sun Network QDR InfiniBand Gateway Switch ... » Sun Network QDR InfiniBand Gateway Switch ... » Late-Breaking Information » Software Information and Issues » New ifconfig Command

Updated: October 2019

Document Information

Using This Documentation

Late-Breaking Information

Features and Functionality Documented

Known Problems

General Information and Issues

Jumbo Frames

Subnet Manager

Snapshot Dataset Information

Software Information and Issues

Partition Configuration Consistency Checking

Infiniband Switch Power Supplies With Part Number 7351491 Require Firmware 2.2.9-3 or Later

IPMI 2.0 is Reenabled After Upgrading From Firmware 2.1 to 2.2

Management Ethernet Port Numbers Used in Firmware Version 2.2

Inactive FIPS Target

Main Board, Management Controller, and Chassis Serial Numbers

High Availability in Partitions

Email Alert Rules

Oracle Solaris EoIB Considerations After Upgrading to Firmware 2.2

Hardware Information and Issues

Reset Undervoltage Condition

Ethernet Support

Unusable Ports

Documentation Information and Issues

Correct Description of the create_ipoib Command

Correct Description of the smsubnetprotection Command

Autodisable Command

Upgrade and Downgrade Paths Supported

Firmware Update Guidelines

Determine Management Controller Type

disablegwport Command Connector Invalid

Replace a Gateway

Multiple Subnet Managers in a Single Fabric

Upgrading the Gateway Firmware

Language:

New `ifconfig` Command

Starting with firmware version 2.2.6, the ifconfig command shows information for an IP interface in the CLI.

Syntax

ifconfig [–a | interface]

where:

interface is the name of the IP interface. Valid values include eth0, lo, dummy0, and ib0.

Options

Option	Description
`–a`	Displays the status of all interfaces, even those that are down.