4.594 rtrv-tbl-capacity
Use this command to retrieve table use capacity summary information. For each table listed, the number of table entry elements in use and the total allowed number of table elements is presented, along with a percent (%) full value.
Parameters
This command has no parameters.
Example
rtrv-tbl-capacity
Dependencies
None
Notes
This command can be canceled using the F9 function key or the canc-cmd
command. See canc-cmd
for more information.
XLIST table information is shown only if the CRMD feature is ON.
Secondary Point Code (SPC) table information is shown only if the MPC feature is ON.
If the EGTT feature is ON then table name is GTA instead of GTT.
Additional information for each listed table can be displayed using the commands listed in Table 4-55.
Though the ASP table entries are now part of the IPAPSOCK table, command entry and output still appear as though they are separate tables. The rtrv-tbl-capacity
command shows the number of ASPs in the 4000-entry IPAPSOCK table.
Table 4-55 Retrieve Commands for Additional Table Information
Command | Table name | Description of table |
---|---|---|
|
XLIST |
Destination - Routeset Extension |
|
IPRTKEY |
IP Routing Key |
|
AS |
Application Server |
|
IPAPSOCK |
IP Socket/Association |
|
DSTN |
Destination Routeset, Exception Routeset |
|
GTA |
Global Title Address |
|
GTT |
Global Title Translation |
|
IP-HOST |
IP Host |
|
IP-LNK |
Internet Process Link |
|
LS |
Link Set |
|
MAP |
Mated Application |
|
MRN |
Mated Relay Node |
|
NPP-AS |
Numbering Plan Processor |
|
NPP-SRS |
Numbering Plan Processor |
|
SCRSET |
Gateway Screening Screen Set |
|
SLK |
Signal Link |
|
SPC |
Secondary Point Code |
|
VFLXCD |
V-Flex Call Decision |
|
VFLXRN |
V-Flex Routing Number |
|
VFLXVID |
V-Flex VMSID |
|
GTT-ACT |
GTT Action |
|
GTT-ASET |
GTT Action Set |
|
GTT-PATH |
GTT Action Path |
|
GTMOD |
GT Modification |
The MRN table capacity value is adjusted to subtract any point code values allocated to support the SCCP-SERV reroute service.
V-Flex Call Decision (VFLXCD), Routing Number (VFLXRN) and VMSID (VFLXVID) table information is shown only if the V-Flex feature is enabled.
Output
This example shows the output for the minimum table sizes in the system when CRMD, MPC, EGTT and VFLEX features are off:
rtrv-tbl-capacity
tekelecstp 010-03-06 13:57:06 EST EAGLE 42.0.0
DSTN table is ( 8 of 2000) 1% full
LS table is ( 6 of 1024) 1% full
SLK table is ( 12 of 1200) 1% full
IP-LNK table is ( 0 of 512) 0% full
IP-HOST table is ( 2 of 2048) 1% full
MAP table is ( 8 of 1024) 1% full
MRN table is ( 0 of 3000) 0% full
SCCPSRV table is ( 0 of 384) 0% full
GTT table is ( 0 of 269999) 0% full
GTT-SET table is ( 21 of 2000) 2% full
SSNSELID table is ( 0 of 100000) 0% full
SCRSET table is ( 0 of 255) 0% full
RTEKEY table is ( 0 of 1000) 0% full
APPLSOCK table is ( 0 of 4000) 0% full
AS table is ( 0 of 250) 0% full
NPP-AS table is ( 0 of 1024) 0% full
NPP-SRS table is ( 0 of 8192) 0% full
GTMOD table is ( 1 of 100000) 1% full
;
This example shows the output for the maximum table sizes in the system. For the DSTN, SLK, GTT, and MAP tables, maximum values depend on the enabled feature quantity value applicable to the table in the system. GTT, MPC, CRMD, VFLEX and FGTTLS features are turned on.
rtrv-tbl-capacity
rlghncxa03w 10-08-17 08:29:15 EST EAGLE 43.0.0
DSTN table is ( 600 of 10000) 6% full
XLIST table is ( 0 of 500) 0% full
SPC table is ( 0 of 40) 0% full
LS table is ( 512 of 1024) 50% full
SLK table is ( 1501 of 2800) 54% full
IP-LNK table is ( 0 of 512) 0% full
IP-HOST table is ( 0 of 2048) 0% full
MAP table is ( 1500 of 36000) 5% full
MRN table is ( 0 of 3000) 0% full
SCCPSRV table is ( 0 of 384) 0% full
GTA table is ( 0 of 269999) 0% full
GTT-SET table is ( 10 of 2000) 1% full
SSNSELID table is ( 0 of 100000) 0% full
SCRSET table is ( 25 of 255) 10% full
RTEKEY table is ( 0 of 1000) 0% full
APPLSOCK table is ( 0 of 4000) 0% full
AS table is ( 0 of 250) 0% full
VFLXCD table is ( 1 of 4950) 1% full
VFLXRN table is ( 1 of 10000) 1% full
VFLXVID table is ( 1 of 1000) 1% full
NPP-AS table is ( 0 of 1024) 0% full
NPP-SRS table is ( 0 of 8192) 0% full
GTT-ACT table is ( 0 of 2000) 0% full
GTT-ASET table is ( 0 of 20000) 0% full
GTMOD table is ( 1 of 100000) 1% full
GTT-PATH table is ( 3 of 10000) 1% full
;
This example shows the output when the MRN table limit is 3000 entries and 12 entries are used for SCCP-SERV reroute:
rtrv-tbl-capacity
tklc1090701 10-03-06 13:57:06 EST EAGLE 42.0.0
DSTN table is ( 5940 of 6000) 99% full
XLIST table is ( 0 of 500) 0% full
SPC table is ( 4 of 40) 10% full
LS table is ( 738 of 1024) 72% full
SLK table is ( 360 of 2000) 18% full
IP-LNK table is ( 6 of 512) 1% full
IP-HOST table is ( 58 of 2048) 3% full
MAP table is ( 336 of 1024) 33% full
MRN table is ( 768 of 2988) 26% full
SCCPSRV table is ( 12 of 96) 13% full
GTA table is ( 269999 of 269999) 100% full
GTT-SET table is ( 10 of 2000) 1% full
SSNSELID table is ( 0 of 10000) 0% full
SCRSET table is ( 40 of 255) 16% full
RTEKEY table is ( 0 of 1000) 0% full
APPLSOCK table is ( 0 of 4000) 0% full
AS table is ( 0 of 250) 0% full
VFLXRN table is ( 1 of 10000) 1% full
VFLXCD table is ( 1 of 4950) 1% full
VFLXVID table is ( 1 of 1000) 1% full
NPP-AS table is ( 6 of 1024) 1% full
NPP-SRS table is ( 0 of 8192) 0% full
GTT-ACT table is ( 0 of 2000) 0% full
GTT-ASET table is ( 0 of 20000) 0% full
GTMOD table is ( 1 of 100000) 1% full
GTT-PATH table is ( 3 of 10000) 1% full
;