Understanding LED Status Indicators

Language:

The Port 1 and Port 2 LED status indications vary depending on the operating protocol mode of the universal HBA (see Determining and Changing the Current Operating Protocol Mode):

Table 7, Universal Host Bus Adapter LED Status Indicators for CNA Mode summarizes the LED status indications for CNA mode. The Mode, Activity, and Link LED columns in the table correspond to the LEDs in the figure from left to right.
Table 8, Universal Host Bus Adapter LED Status Indicators for Fibre Channel Only Mode summarizes the LED status indications for Fibre Channel (FC) Only mode. The 16 Gb, 8 Gb, and 4 Gb columns in the table correspond to the LEDs in the figure from left to right.

Table 7 Universal Host Bus Adapter LED Status Indicators for CNA Mode

Mode LED	Activity LED	Link LED	Activity
Off	Off	Off	Power off
On	Off	Off	Power on (no link)
On	On	On	Power on, 10 GbE link established, no activity
On	Flashing	On	10 GbE link established; transmit and receive Ethernet and/or storage activity
On	Slow flashing, alternating with Link LED	Slow flashing, alternating with Activity LED	Beaconing

Table 8 Universal Host Bus Adapter LED Status Indicators for Fibre Channel Only Mode

16 Gb FC LED (Amber)	8 Gb FC LED (Green)	4 Gb FC LED (Amber)	Activity
Off	Off	Off	Power off
On	On	On	Power on (before firmware initialization)
Flashing	Flashing	Flashing	Power on (after firmware initialization)
Flashing in sequence	Flashing in sequence	Flashing in sequence	Firmware fault
Off	Off	On or Flashing	4 Gb link established (on) and active (flashing)
Off	On or Flashing	Off	8 Gb link established (on) and active (flashing)
On or Flashing	Off	Off	16 Gb link established (on) and active (flashing)
Flashing	Off	Flashing	Beaconing