Removing the Hardware
The following instructions describe how to remove the universal
HBA. Refer to your system installation or service manual for detailed
removal instructions.
The following steps summarize the hardware removal process:
Halt the operating
system and remove power from the system.
Remove the universal HBA hardware.
To Remove the Universal Host
Bus Adapter
- Attach
an ESD strap to your wrist (see Observing ESD and Handling Precautions).
- Refer to your system documentation
to shut down, power off, and unplug the system.
- Disconnect all cables.
- Unscrew the case screws and remove
the system case.
- Remove the mounting bracket of
the universal HBA from the system by unscrewing the panel screw
or removing the clip, whichever is being used.
You can now remove the universal HBA.