Read the following cable requirements for connecting the server.
Minimum cable connections for the server:
At least one server on-board Ethernet network connection (NET port)
See Ethernet Ports.
Serial management port (SER MGT): Service processor (SP) local connection for Oracle ILOM boot messages
See SER MGT Ports.
Power cables for the server power supplies
SP management ports: There are two service processor management ports.
The SER MGT port uses an RJ-45 cable and is always available. This port is the default connection to the Oracle ILOM SP.
See SER MGT Ports.
The network management port (NET MGT) port is the optional connection to the Oracle ILOM SP. The SP network management port uses an RJ-45 cable for a 10/100 BASE-T connection.
See NET MGT Ports.
NET Ethernet ports: The Ethernet ports, labeled NET0, NET1, NET2, and NET3, connect the server to the network. The server Ethernet interfaces operate at 100 Mbit/sec, 1000 Mbit/sec, and 10,000 Mbit/sec.
See Ethernet Ports.
USB Ports: USB ports support hot-plugging. You can connect and disconnect USB cables and peripheral devices while the server is running without affecting server operations.
See USB Ports.
AC power cables: The server includes four power supply connectors, one for each power supply.