SMOD Status Indicators and Buttons
The following figure shows the indicators, buttons, and ports on an SMOD.
-
For single 4-socket systems, the indicators on SMOD1 are inactive.
-
For single 8-socket systems, the SMOD1 indicators are still active but the
system-level indicators remain inactive.
|
|
1
|
Locate indicator/button – Used to identify the server.
|
2
|
|
3
|
|
4
|
SP OK – Steady on if SP is operating, blinks while SP is
booting, off if SP has no power.
|
5
|
SMOD Service Required indicator – Indicates a system
module (SMOD) fault
|
6
|
SMOD OK indicator – Steady on if SMOD is operating,
blinks while SMOD is booting, off if SMOD has no power.
|
7
|
HBA Service Required indicator – Indicates a host bus
adapter (HBA) fault
|
8
|
NET0, NET1, NET2, and NET3 ports
|
|