Documentation, Support, and Training
Understanding Switch Specifications
Understanding InfiniBand Cabling
Verify Shipping Carton Contents
Install the Switch in the Rack
Verifying the InfiniBand Fabric
Understanding Administrative Commands
Monitoring the InfiniBand Fabric
Controlling the InfiniBand Fabric
Controlling the Subnet Manager
Understanding Oracle ILOM on the Switch
Understanding Oracle ILOM Targets
Installing the Oracle ILOM Firmware
Acquire the Oracle ILOM Firmware Version 1.1.3
Install the Oracle ILOM Firmware Version 1.1.3
Administering Oracle ILOM (CLI)
Accessing Oracle ILOM From the CLI
Switching Between the Oracle ILOM Shell and the Linux Shell
Monitoring Oracle ILOM Targets (CLI)
Controlling Oracle ILOM Targets (CLI)
Upgrading the Switch Firmware Through Oracle ILOM (CLI)
Administering Oracle ILOM (Web)
Access Oracle ILOM From the Web Interface
Monitoring Oracle ILOM Targets (Web)
Controlling Oracle ILOM Targets (Web)
Upgrading the Switch Firmware Through Oracle ILOM (Web)
Accessing the Rear Panel Diagram
Accessing Status Pane Information
Monitoring Parameters and Status
Administering Oracle ILOM (SNMP)
Monitoring Oracle ILOM Targets (SNMP)
Controlling Oracle ILOM Targets (SNMP)
Display the Sensors' State (IPMI)
Display the Sensor Information (IPMI)
Display the System Event Log (IPMI)
Display FRU ID Information (IPMI)
Display Switch Status LED States (IPMI)
Disable the Locator LED (IPMI)
Understanding Oracle ILOM Commands
Understanding Hardware Commands
Linux Shells for Hardware Commands
Understanding InfiniBand Commands
Linux Shells for InfiniBand Commands
Understanding the SUN-DCS-MIB MIB OIDs
Understanding the SUN-ILOM-CONTROL-MIB MIB OIDs
Understanding the SUN-PLATFORM-MIB MIB OIDs
Creates topology file.
generatetopology topofile|[-h]
where topofile is the filename and path to the topology file.
This hardware command creates a topology file of the InfiniBand fabric. This file is not compatible with the topology file created by the ibnetdiscover command. The generatetopology command is used with the matchtopology and showtopology commands to determine changes in the InfiniBand fabric. The -h option provides help.
The generatetopology command is available from the /SYS/Fabric_Mgmt Linux shell target of the Oracle ILOM CLI interface.
The following example shows how to create a topology file called Topo.conf with the generatetopology command.
# generatetopology Sept8.topo It will take some time to generate a topology file. Please wait! topo.conf exist! will move it to topo.conf.old will create new topo.conf Topo.conf file is created. Will now start generating the topo file Wrote Topology file:Sept8.topo #
The following is a portion of a topology file created by the generatetopology command.
Note - Your topology file will differ.
DEV26418_02P nsn34-45_HCA-1 P1 -4x-10G-> SUNDCS36QDR nsn34-170 C-0A P2 -4x-10G-> SUNDCS36QDR nsn34-170 C-0B SUNDCS36QDR nsn34-170 P1 -4x-10G-> SUNIBQDRGW nsn34-97 C-7A P2 -4x-10G-> I4_GENERIC nsn34-98 P33 SUNIBQDRGW nsn34-97 C-17A -4x-10G-> SUNDCS36QDR nsn34-170 C-17B C-17B -4x-10G-> SUNDCS36QDR nsn34-170 C-17A C-16A -4x-10G-> SUNDCS36QDR nsn34-170 C-16B C-16B -4x-10G-> SUNDCS36QDR nsn34-170 C-16A C-15A -4x-10G-> SUNDCS36QDR nsn34-170 C-15B C-15B -4x-10G-> SUNDCS36QDR nsn34-170 C-15A C-14A -4x-10G-> SUNDCS36QDR nsn34-170 C-13A C-14B -4x-10G-> SUNDCS36QDR nsn34-170 C-8A . . . DEV26418_02P nsn34-39_HCA-1 P1 -4x-10G-> SUNDCS36QDR nsn34-170 C-12A P2 -4x-10G-> SUNDCS36QDR nsn34-170 C-13B # Created from nsn34-170 at Wed Sep 8 14:18:52 CEST 2010