Documentation, Support, and Training
Understanding Switch Specifications
Understanding InfiniBand Cabling
Verify Shipping Carton Contents
Install the Switch in the Rack
Verifying the InfiniBand Fabric
Understanding Administrative Commands
Monitoring the InfiniBand Fabric
Controlling the InfiniBand Fabric
Controlling the Subnet Manager
Understanding Oracle ILOM on the Switch
Understanding Oracle ILOM Targets
Installing the Oracle ILOM Firmware
Acquire the Oracle ILOM Firmware Version 1.1.3
Install the Oracle ILOM Firmware Version 1.1.3
Administering Oracle ILOM (CLI)
Accessing Oracle ILOM From the CLI
Switching Between the Oracle ILOM Shell and the Linux Shell
Monitoring Oracle ILOM Targets (CLI)
Controlling Oracle ILOM Targets (CLI)
Upgrading the Switch Firmware Through Oracle ILOM (CLI)
Administering Oracle ILOM (Web)
Access Oracle ILOM From the Web Interface
Monitoring Oracle ILOM Targets (Web)
Controlling Oracle ILOM Targets (Web)
Upgrading the Switch Firmware Through Oracle ILOM (Web)
Accessing the Rear Panel Diagram
Accessing Status Pane Information
Monitoring Parameters and Status
Administering Oracle ILOM (SNMP)
Monitoring Oracle ILOM Targets (SNMP)
Controlling Oracle ILOM Targets (SNMP)
Display the Sensors' State (IPMI)
Display the Sensor Information (IPMI)
Display the System Event Log (IPMI)
Display FRU ID Information (IPMI)
Display Switch Status LED States (IPMI)
Disable the Locator LED (IPMI)
Understanding Oracle ILOM Commands
Understanding Hardware Commands
Linux Shells for Hardware Commands
Understanding InfiniBand Commands
Linux Shells for InfiniBand Commands
Understanding the SUN-DCS-MIB MIB OIDs
Understanding the SUN-ILOM-CONTROL-MIB MIB OIDs
Understanding the SUN-PLATFORM-MIB MIB OIDs
The Oracle ILOM implementation on the management controller within the switch provides an IPMI server, which can communicate the state of the switch hardware through the Intelligent Platform Management Interface.
An IPMI client is required to interface with the Oracle ILOM IPMI stack on the management controller. You must have administrator privileges to interface with the stack.
The ipmitool utility is the IPMI client used in these topics and has the following format:
$ ipmitool -v -I lan -H mc_IP -U user command option
where:
mc_IP is the IP address of the management controller.
user is the user with administrative privileges. For example, ilom-admin.
command is the command to be run on the management controller.
option is an optional argument or parameter to the command.
Note - After typing the ipmitool command line, you must type the password of the user for the utility to continue. For the ilom-admin user, the default password is ilom-admin.
For more information about and use of IPMI with Oracle ILOM, refer to the Oracle Integrated Lights Out Manager (ILOM) 3.0 Management Protocols Guide, 820-6413, available online at: