Documentation, Support, and Training
Understanding Switch Specifications
Understanding InfiniBand Cabling
Verify Shipping Carton Contents
Install the Switch in the Rack
Verifying the InfiniBand Fabric
Understanding Administrative Commands
Monitoring the InfiniBand Fabric
Controlling the InfiniBand Fabric
Controlling the Subnet Manager
Understanding Oracle ILOM on the Switch
Understanding Oracle ILOM Targets
Installing the Oracle ILOM Firmware
Acquire the Oracle ILOM Firmware Version 1.1.3
Administering Oracle ILOM (CLI)
Accessing Oracle ILOM From the CLI
Switching Between the Oracle ILOM Shell and the Linux Shell
Monitoring Oracle ILOM Targets (CLI)
Controlling Oracle ILOM Targets (CLI)
Upgrading the Switch Firmware Through Oracle ILOM (CLI)
Administering Oracle ILOM (Web)
Access Oracle ILOM From the Web Interface
Monitoring Oracle ILOM Targets (Web)
Controlling Oracle ILOM Targets (Web)
Upgrading the Switch Firmware Through Oracle ILOM (Web)
Accessing the Rear Panel Diagram
Accessing Status Pane Information
Monitoring Parameters and Status
Administering Oracle ILOM (SNMP)
Monitoring Oracle ILOM Targets (SNMP)
Controlling Oracle ILOM Targets (SNMP)
Display the Sensors' State (IPMI)
Display the Sensor Information (IPMI)
Display the System Event Log (IPMI)
Display FRU ID Information (IPMI)
Display Switch Status LED States (IPMI)
Disable the Locator LED (IPMI)
Understanding Oracle ILOM Commands
Understanding Hardware Commands
Linux Shells for Hardware Commands
Understanding InfiniBand Commands
Linux Shells for InfiniBand Commands
Understanding the SUN-DCS-MIB MIB OIDs
Understanding the SUN-ILOM-CONTROL-MIB MIB OIDs
Understanding the SUN-PLATFORM-MIB MIB OIDs
Note - This procedure brings the management controller offline until after the upgrade is completed.
Caution - The firmware upgrade completely erases the management controller’s file system. |
# disablesm Stopping partitiond daemon. [ OK ] Stopping IB Subnet Manager.. [ OK ] #
# cd /tmp # sh spfw_upgrade_1.1.3.sh http://URL_to_directory #
where URL_to_directory is a URL that points to the directory on the web server that contains the unpacked .rpm files from the SUN_DCS_36p_1.1.3.tar file.
The upgrade begins.
# reboot
# version SUN DCS 36p version: 1.1.3 Build time: Mar 25 2010 10:00:23 SP board info: Manufacturing Date: 2009.02.19 Serial Number: "NCD2S0133" Hardware Revision: 0x0100 Firmware Revision: 0x0102 BIOS version: NOW1R112 BIOS date: 04/24/2009 #
# enablesm Starting IB Subnet Manager. [ OK ] Starting partitiond daemon. [ OK ] #
See Upgrading the Switch Firmware Through Oracle ILOM (CLI) or Upgrading the Switch Firmware Through Oracle ILOM (Web).