Server Module Not SAS–2 Capable Error

If you are trying to assign storage module resources to a server module that does not have a SAS-2 REM, you will see a “Not SAS-2 Capable” error listed in the Sun Blade Zone Manager.

What to look for:

The following table provides examples of how the web interface and CLI might look like when you have servers that are not SAS-2 capable.

CMM ILOM

If Server Blade is Not SAS-2 Capable

Web interface

In Sun Blade Zone Manager configuration window. image:Graphic showing server module that is non-SAS-2 capable.

CLI

-> show –level all

/STORAGE/sas_zoning
    Targets:
        BL1
        BL2
        BL3     <-- Note: only SAS-2 capable blades
        BL7         (servers, storage modules) are shown.
        BL8
        NEM0
        NEM1

    Properties:
        zone_management_state = enabled
        reset_password_action = (Cannot show property)
        reset_access_action = (Cannot show property)

Actions to perform:

Only server modules with a SAS-2 REM can be assigned storage module resources.
Check that the server module ILOM service processor has the latest supported ILOM firmware.
Check that the server module REM has the latest supported firmware.

Skip Navigation Links
Exit Print View
	Sun Blade Storage Module M2 Administration Guide