Go to main content

Sun Server X2-8 (formerly Sun Fire X4800 M2) Product Notes

Exit Print View

» ...Documentation Home » Sun Server X2-8 Documentation Library » Sun Server X2-8 (formerly Sun Fire X4800 M2) ... » Hardware Issues » Large Number of ixgbe Interrupts Seen With Sun ...

Updated: September 2018

Sun Server X2-8 (formerly Sun Fire X4800 M2) Product Notes

Document Information

Using This Documentation

Important Operating Notes

Supported Software and Firmware

Oracle x86 Products Accessibility

Hardware Issues

System Posts CPU Fault and Fails to Boot on System With Six Sun InfiniBand Dual Port 4x QDR PCIe Low Profile Host Channel Adapter M2 Cards (22536804)

NEM0 Failover and Subsequent Replacement Causes Incorrect Fallback Order

Reset Takes a Long Time and Causes the Server to Power Cycle

Place the Server in Standby Power Mode When Removing a CMOD

Update SP Firmware After Replacing a CMOD or SP Module (15465497)

Do Not Mix Dual-Rank and Quad-Rank DIMMs

MegaCLI CfgEachDskRaid0 Command Does Not Work Correctly (CR 7121867)

When Inserting a CMOD, Simultaneously Rotate Levers Until They Touch the CMOD

Pc_Check Incorrectly Reports Errors on Network Card Tests (CR 7050075)

Large Number of ixgbe Interrupts Seen With Sun Dual 10GbE 12 SFP+ PCIe 2.0 FEM Without SFP+ (CR 7003313)

Disabling of DIMM Pairs When Server Detects Faulty DIMM (CR 7011011)

LEDs and Logs Incorrectly Indicate That CMOD Has Failed (CR 7033674)

Flow Control on Serial Port Does Not Work (CR 7014405)

Oracle Solaris Operating System Issues

Oracle VM Issues

Windows Operating System Issues

Oracle ILOM Issues

Oracle Hardware Installation Assistant Issues

Documentation Errata

Language:

Large Number of ixgbe Interrupts Seen With Sun Dual 10GbE 12 SFP+ PCIe 2.0 FEM Without SFP+ (CR 7003313)

You might see multiple link up/link down messages. These messages are harmless and can be ignored.

Copyright © 2017, 2018, Oracle and/or its affiliates. All rights reserved.