Skip Navigation Links | |
Exit Print View | |
Sun Dual 10 GbE PCIe 2.0 Fibre Channel Over Ethernet Software User's Guide |
Understanding the FCoE Software
Installation Overview (Windows)
Enabling the FCoE Software (Linux)
Enable FCoE During the Linux Installation
Enable FCoE After a Linux Installation
Resolve SAN-Boot Errors (RHEL6.0/OL6.0)
Remove the FCoE Software Package (Linux)
Installing the FCoE Software (Windows)
Upgrade Guidelines for Software Release 15.4 (Windows)
Validation and Storage Certification
Download and Install the Driver (Windows)
Verify the Functionality of the Network Interface
Boot Over a 10GbE Network (Linux)
Set Up the FCoE Boot Option ROM (Windows)
Configure the Cisco Nexus 5000 Series Switch
Configure the Brocade 8000 Series Switch
Configuring Driver Parameters (Linux)
Driver Parameter Settings (Linux)
For information and instructions on the latest patches and updates, check the product notes for your adapter.
Note - The Intel FCoE driver and Ethernet driver are validated as an ordered pair. You must update both drivers at the same time.
Use the Intel FCoE support site to determine which drivers, the NDIS miniport and FCoE drivers, have been validated as ordered pairs. The support site also lists the latest certification status for some storage vendors.
http://www.intel.com/support/network/adapter/x520server/sb/CS-031630.htm?wapkw=fcoe
To download the most recent drivers for the Windows or Linux OS, go to:
http://www.intel.com/support/network/adapter