Skip Navigation Links | |
Exit Print View | |
Sun Dual 10 GbE PCIe 2.0 Fibre Channel Over Ethernet Software User's Guide |
Understanding the FCoE Software
Installation Overview (Windows)
Enabling the FCoE Software (Linux)
Enable FCoE During the Linux Installation
Enable FCoE After a Linux Installation
Resolve SAN-Boot Errors (RHEL6.0/OL6.0)
Remove the FCoE Software Package (Linux)
Installing the FCoE Software (Windows)
Upgrade Guidelines for Software Release 15.4 (Windows)
Validation and Storage Certification
Download and Install the Driver (Windows)
Verify the Functionality of the Network Interface
Boot Over a 10GbE Network (Linux)
Set Up the FCoE Boot Option ROM (Windows)
Configure the Cisco Nexus 5000 Series Switch
Configure the Brocade 8000 Series Switch
Configuring Driver Parameters (Linux)
Driver Parameter Settings (Linux)
These hotfixes are needed for specific use cases.
This hotfix is for all Windows Server 2008 (R1 and R2) releases:
KB983554 - High-performance storage devices fix
These hotfixes are for multipath I/O (MPIO) environments:
Windows 2008 R1 SP2
KB970525 - MPIO
KB972797 - MS DSM
KB974646 - NTFS
KB976748 - MPIO - reboot fix
KB979743 - MPIO - write errors
KB981379 - MS DSM - target issues
Windows 2008 R2
KB979743 - MPIO - write errors
KB981379 - MS DSM - target issues
Windows 2008 R2 SP1
KB2406705 - MPIO timers
You can obtain additional information about these registry settings at:
http://technet.microsoft.com/en-us/library/ee619749(WS.10).aspx
Set the PathRecoveryInterval value to 60.
KB2522766, KB2670762, KB2522766 - MPIO
When using FCoE with Axiom600 and MPIO, set the registry settings to the following values:
UseCustomPathRecoveryInterval to 1.
PathRecoveryInterval to 15.
PDORemovePeriod to 30.
Access the MPIO parameters here:
HKLM\System\CurrentControlSet\Services\mpio\Parameters
This hotfix is for the iSCSI over DCB (QOS binding) environment:
Windows 2008 R1 SP2
KB2518021