View Power History Graphs and Metrics

Language:

To display the power history metrics and bar graphs from the CMM or SP web interface, click Power Management > History.
- SP – You can toggle the graph display between a 1-hour interval and a 14-day interval.
- CMM – You can change the graph display by click the following options:
  - Hardware options: Toggle the power usage between chassis power usage and blade power usage.
    Note - Power history graphs are not available for I/O blade servers installed in a blade chassis. Power history metrics appearing in the Power History table will show a No Data property value for each I/O blade server installed in a blade chassis.
  - Time period: Toggle history between 1-hour and 14-day intervals.
  - Graph series: Toggle the graph series between Minimum power consumed (watts), Average power consumed (watts), Maximum power consumed (watts), or select a combination of these options.

To view additional power history sample sets from the SP or CMM web interface, click the links under the Sample Set column in the Power History table:
The Sample Set links enable you to view a bar graph depicting power consumption wattages in 1-minute intervals over the last hour, or 1-hour intervals over the last 14 days.

Note - The power history metrics and graphs presented by Oracle ILOM are not available from the SP CLI. However, you can from the CMM CLI view the power history consumption metrics by minute or hour and view the time stamps and power wattages for these sample sets by typing these show commands: show /CH/VPS/history/0 show /CH/VPS/history/0/list

Oracle^® ILOM User's Guide for System Monitoring and Diagnostics Firmware Release 3.2.x