| Skip Navigation Links | |
| Exit Print View | |
|
Sun Datacenter InfiniBand Switch 648 Topic Set |
Documentation, Support, and Training
Understanding Administrative Commands
Monitoring the InfiniBand Fabric
Controlling the InfiniBand Fabric
Understanding Signal Routing Through the Switch
Understanding Switch Startup and Component Addition
Understanding ILOM on the Switch
Switching Between the ILOM Shell and the Linux Shell
Controlling ILOM Targets (CLI)
Upgrading the Switch Firmware Through ILOM (CLI)
Administering ILOM (Web Interface)
Access ILOM From the Web Interface
Monitoring ILOM Targets (Web Interface)
Controlling ILOM Targets (Web Interface)
Upgrading the Switch Firmware Through ILOM (Web Interface)
Understanding InfiniBand Cabling
Floor and Underfloor Delivery of InfiniBand Cables
Overhead Delivery of InfiniBand Cables
Understanding Switch Specifications
Network Management Connector and Pins
Serial Management Connector and Pins
Understanding the Installation
Installing the InfiniBand Software Stack
Verifying the InfiniBand Fabric
Understanding Service Procedures
Servicing the Fabric Cards and Fabric Card Fillers
Servicing the InfiniBand Cables
Doing Supportive Software Tasks
Understanding Switch-Specific Commands
 | Caution - Fiber optic InfiniBand cables with laser transceivers must be of a type Class I. |
| Caution - Do not allow any copper core InfiniBand cable to bend tighter than a 5 inch (127 mm) radius. Do not allow any optical InfiniBand cable to bend tighter than a 3.4 inch (85 mm) radius. Tight bends can damage the cable internally. |
| Caution - Do not use zip ties to bundle or support InfiniBand cables. The sharp edges of the ties can damage the cables internally. |
| Caution - Do not allow any InfiniBand cable to experience extreme tension. Do not pull on an InfiniBand cable or allow it to drag. Unroll an InfiniBand cable for its length. Pulling on an InfiniBand cable can damage the cables internally. |
| Caution - Do not twist an InfiniBand cable more than 1 revolution for its entire length. Twisting an InfiniBand cable can damage the cable internally. |
| Caution - Do not route InfiniBand cables where they might be stepped upon or experience rolling loads. Such a crushing effect can damage the cable internally. |
|