- Document Information
- Preface
- 1. Overview of Using Sun Blade 6000 Disk Modules With Server Modules
- 2. Inserting, Moving and Replacing the Sun Blade 6000 Disk Module
- 3. System Requirements
- 4. Upgrading Systems
- Replacing Older X6220 Server Blades
- Upgrading the Chassis ILOM
- Overview of Upgrading Firmware on x86 Server Blades
- Updating Operating System Drivers on x86 Server Blades
- Upgrading Firmware on SPARC Server Blades
- Upgrading Disk Blade and SAS-NEM Firmware
- Updating Solaris Network Installation Servers
- 5. Installing, Removing or Replacing Disks
- 6. Multipathing and RAID
- Multipathing Overview
- Multipathing Using LSI Host Bus Adapters
- Multipathing Using Adaptec Host Bus Adapters
- Multipathing at the OS Level
- Hardware RAID Hides Dual Paths From the OS
- Multipathing With RHEL 5.x Linux and LSI Host Bus Adapters
- Multipathing With the Solaris OS and LSI Host Bus Adapters
- To Install Multipathing for the Solaris OS
- Multipathing With Windows Server 2008 and LSI Host Bus Adapters
- Multipathing with VMware ESX 3.5 and LSI Host Bus Adapters
- 7. How LSI Host Bus Adapters Assign Target IDs to Expanders, Disks, and RAID Volumes
- 8. How Adaptec Host Bus Adapters Assign Target IDs to Expanders, Disks, and RAID Volumes
- 9. Setting Up Hardware RAID Volumes With LSI and Adaptec Host Bus Adapters
- RAID Options
- Setting Up Hardware RAID With LSI Host Bus Adapters
- Setting Up Hardware RAID With the Adaptec Host Bus Adapters
- 10. ILOM For the Sun Blade 6000 Disk Module
- 11. Oracle's Sun Storage Common Array Manager (CAM)
- A. Using the SIA Application to Upgrade x86 Server Blade and Host Bus Adapter Firmware
- B. Using the lsiutil Software
- C. Upgrading the Disk Module to Allow a SAS-2 Compatible Server Blade in the Chassis
- Index
Sun Blade 6000 Disk Module
Administration Guide
June 2010, Revision A
This document provides procedures for connecting, managing and maintaining the Sun Blade 6000 Disk Module.
