| Skip Navigation Links | |
| Exit Print View | |
|
Sun InfiniBand Dual Port 4x QDR PCIe Low Profile Host Channel Adapter M2 User's Guide |
| Skip Navigation Links | |
| Exit Print View | |
|
|
Sun InfiniBand Dual Port 4x QDR PCIe Low Profile Host Channel Adapter M2 User's Guide |
Hardware and Software Requirements
Hot-Swap the Adapter (Oracle Solaris)
Installing InfiniBand Software on the Oracle Solaris OS
InfiniBand Software for Oracle Solaris 10
Download the Firmware Flash Update Tool for IB-HCAs (Oracle Solaris 10)
Verify the Installation (Oracle Solaris)
Update the Firmware (Oracle Solaris)
InfiniBand Devices on the Oracle Solaris 10 OS
Installing InfiniBand Software on Linux
Acquire the BXOFED Software (Linux)
Install the BXOFED Software (Linux)
Internet Protocol Over InfiniBand (Linux)
Verify the Installation (Linux)
Replacing a Short Bracket With a Tall Bracket
Remove the Short Bracket From the Adapter
The adapter is compliant with the InfiniBand Architecture Specification, Release 1.2. The adapter has two compliant 4x InfiniBand ports, 1 and 2. The adapter provides access to these ports by means of two 4x InfiniBand QSFP connectors for external InfiniBand copper cables. These cables must be compliant with the InfiniBand Architecture Specification, Release 1.2. Connector 1 connects to Port 1 of the device, while connector 2 connects to Port 2.
The adapter is embedded with a media detect circuit, which supports external InfiniBand fiber solutions. These external devices are connected to the InfiniBand port connectors using active media converters, such as the Emcore QTR3400 Smart Module or the Fujitsu FPD-010R008-0E o-microGiGaCN.
|