Skip Navigation Links | |
Exit Print View | |
![]() |
Sun InfiniBand Dual Port 4x QDR PCIe Low Profile Host Channel Adapter M2 User's Guide |
Hardware and Software Requirements
Hot-Swap the Adapter (Oracle Solaris)
Installing InfiniBand Software on the Oracle Solaris OS
InfiniBand Software for Oracle Solaris 10
Download the Firmware Flash Update Tool for IB-HCAs (Oracle Solaris 10)
Verify the Installation (Oracle Solaris)
Update the Firmware (Oracle Solaris)
InfiniBand Devices on the Oracle Solaris 10 OS
Installing InfiniBand Software on Linux
Acquire the BXOFED Software (Linux)
Install the BXOFED Software (Linux)
Internet Protocol Over InfiniBand (Linux)
Verify the Installation (Linux)
Replacing a Short Bracket With a Tall Bracket
Remove the Short Bracket From the Adapter
The adapter has four LEDs located on the I/O panel. Two LEDs are assigned to each 4X port.
Figure 2 I/O Panel With Dual Ports and LEDs
Figure Legend
1 InfiniBand Port 1
2 Green LED for Port 1 (Physical Link)
3 Amber LED for Port 1 (Data Activity Link)
4 InfiniBand Port 2
5 Amber LED for Port 2 (Data Activity Link)
6 Green LED for Port 2 (Physical Link)
The same port names and LED footprints apply when a tall bracket is installed on the adapter. To install the supplied tall bracket, see Replacing a Short Bracket With a Tall Bracket.
The pair of LEDs for each port have the meanings described in the following table.
Table 2 LED Meanings
|