Remove the Short Bracket From the Adapter

1. Remove the bracket screws and washers.

   Unscrew both screws from the adapter using a torque screwdriver.

   
   
2. Detach the bracket.
   1. Grip the bracket as shown in the following figure, placing your thumb on the LED component.
      
   2. In a rotating move toward the component side of the adapter, slide the bracket out of the connectors.
   3. Gently hold your thumb on the LED component, as shown in the figure. At the same time extract the bracket, while making sure to protect the LEDs.
   4. Make a rotating move to detach the short bracket, as shown in the figure.

Related Information

• Assemble and Install a Tall Bracket