| Skip Navigation Links | |
| Exit Print View | |
|
Sun Blade Storage Module M2 Administration Guide |
About This Documentation (PDF and HTML)
SAS Device Access to the Chassis SAS-2 Domain
Host Access to Storage Module Resources Using the Sun Blade Zone Manager
How to Assign Storage to Hosts Using the CMM ILOM Web Interface
How to Assign Storage to Hosts Using the CMM ILOM CLI
Overview of Storage Module Management
Management Options Using the CMM ILOM
Management Options Using the Sun Storage 6Gb SAS REM RAID HBA (SGX-SAS6-R-REM-Z)
Management Options Using the Sun Storage 6Gb SAS REM HBA (SGX-SAS6-REM-Z)
Performing Maintenance and Hot Plug Actions
Preparing for Hot Plug Actions
Recovering Zoning Configurations
Upgrading Storage Module Firmware
Importing Existing Virtual Drives to a Replacement REM
Replacing a REM on a SPARC System
Replacing a REM on an x86 System
Storage Module Sensors and Indicators
Displaying Sensor and Indicator Information Using the CMM ILOM Web Interface
Displaying Sensor and Indicator Information Using the CMM ILOM CLI
How to Assign Storage to Hosts Using the CMM ILOM Web InterfaceTroubleshootingStorage Module Becomes Inaccessible at Host and ILOM /CH/BLx/fault_state is Storage Module Becomes Inaccessible at Host and ILOM /CH/BLx/STATE is SAS Path Disappears and ILOM /CH/NEMx/fault_state is NEM STATE (/CH/NEMx/STATE) is Not “Running”Sun Blade Zone Manager Not ReadyMissing SAS–2 Components ErrorNEM /CH/NEMx/OK Indicator is in Standby BlinkNEM IssuesNewly Inserted NEM is Not DiscoveredServer Module Not SAS–2 Capable ErrorStorage Module IssuesViewing the CMM ILOM Event LogSun Blade Zone Manager Issues
|